SONAX PROFILINE CeramicCoating "CC" Evo (Two-Step) Ceramic Coating 150ml

The SONAX Flagship Ceramic Coating — SONAX PROFILINE CeramicCoating CC Evo Two-Stage System

What does the SONAX PROFILINE CeramicCoating CC Evo do? The two-stage ceramic coating, consisting of BaseCoat and GlossCoat, protects paint for up to 5 years against UV, chemicals, and weather — with maximum adhesion thanks to the promoter step and extreme gloss from the final GlossCoat.

In the SONAX PROFILINE ceramic range, the SONAX PROFILINE CeramicCoating CC Evo stands at the top: The two-stage system, consisting of BaseCoat and GlossCoat, offers the longest protection duration, the highest SiO₂ concentration, and the most sophisticated application protocol of the entire SONAX PROFILINE range. Up to 5 years of paint protection against UV radiation, chemical attacks, acid rain, and mechanical impacts — this is the promise of the CC Evo, which is fulfilled with consistent preparation and proper application. The scope of delivery of 150 ml, including 4 application pads, is designed for one vehicle and contains sufficient material for an uncompromising coating result. The CC Evo is the product for detailing studios that want to give their customers the best.

• Two-stage system for maximum adhesion and superior protection duration. The decisive difference of the CC Evo compared to single-stage ceramic coatings lies in its two-stage structure: The BaseCoat is applied as the first step directly to the decontaminated, polished, and degreased clear coat, creating a chemical adhesion bridge between the paint surface and the subsequent GlossCoat. This promoter function of the BaseCoat significantly increases the adhesion of the entire system compared to a direct single-layer application — the result is a deeper, more durable anchoring of the ceramic layer in the clear coat, which extends the protection duration to up to 5 years.
• GlossCoat for maximum shine and UV protection as a final layer. The GlossCoat of the CC Evo is responsible for the optical and protective finish: It forms the outer ceramic layer that makes contact with environmental influences and at the same time determines the gloss effect of the entire system. The GlossCoat's formulation is optimized for maximum transparency and gloss enhancement — the vehicle appears deeper, clearer, and more luminous after curing than before coating. UV absorbers in the GlossCoat formulation protect both the ceramic layer and the underlying paint from UV degradation.
• Up to 5 years of protection with regular care — the economical long-term solution. Those who apply the CC Evo to a vehicle and regularly maintain the ceramic layer with a ceramic-compatible topper will protect the paint for a period in which conventional wax sealants would have to be reapplied multiple times. The total cost over 5 years — one application kit plus periodic topper products — is significantly lower than the cost of regular polymer sealing treatments. Especially for high-priced vehicles, where paint preservation directly affects resale value, the CC Evo is an investment that pays off.

Practical Tip from Detailing1: The CC Evo system does not forgive errors in preparation — and evaluates the initial condition of the paint more strictly than single-stage systems because the longer durability means that errors also remain visible for longer. Our protocol: Complete decontamination (iron remover, tar, clay bar if needed), then paint thickness measurement on all panels, polishing pass with SONAX PROFILINE PerfectFinish for a mirror-smooth surface, finally 1:1 IPA wipe over all areas. Apply BaseCoat first and let it dry completely (according to manufacturer's instructions) — only then apply GlossCoat. During application, mask off edges, seals, and rubber elements or wipe immediately. For ongoing care after curing, we recommend the SONAX PROFILINE Ceramic SprayCoating as a topper after each wash — this extends the durability of the CC Evo and reactivates hydrophobicity between care cycles.

Two-stage ceramic chemistry explained — how BaseCoat and GlossCoat interact

The two-stage principle of the SONAX PROFILINE CeramicCoating CC Evo is based on a chemical synergy between two specialized layers. The BaseCoat contains reactive organosilane compounds which, upon application to the clear coat, form covalent bonds with the hydroxyl groups of the paint surface. This chemical cross-linking creates a high-strength adhesion bridge and simultaneously forms a reactive surface layer optimized for the GlossCoat. The waiting time between BaseCoat and GlossCoat is crucial: Too short a waiting time means that the BaseCoat has not yet fully reacted with the paint surface; too long a waiting time can partially deactivate the reactive surface of the BaseCoat. The time window for GlossCoat application is precisely specified in the product data sheet — it must be adhered to.

The GlossCoat, in turn, reacts with the reactive surface of the BaseCoat and forms a covalently cross-linked overall layer of two ceramic layers. This double-layer architecture is structurally more stable and chemically denser than a single layer of the same total thickness — the protective properties are not additive, but synergistic. The outer GlossCoat layer takes on primary contact with environmental influences (UV radiation, water, chemicals), while the BaseCoat ensures structural adhesion and connection to the clear coat. The result is a ceramic layer composite that surpasses the single-layer performance of single-stage coatings in durability and protective intensity.

Curing process of the CC Evo: Chemical cross-linking of both layers begins immediately after application, but full curing (complete cross-linking of all SiO₂ chains) takes 7–14 days at room temperature. In the first 24–48 hours, the layer is still mechanically sensitive; moisture and water should be completely avoided in the first 24 hours. Professional coating studios use controlled conditions for curing (temperature 20–25 °C, relative humidity 40–60%) and infrared curing lamps, which can reduce the curing time to 2–4 hours. For workshops without an infrared system, a heated, dry hall is the minimum requirement.

CC Evo application protocol — the complete workflow for professional results

The application of SONAX PROFILINE CeramicCoating CC Evo requires a structured protocol that can be divided into three phases. Phase 1 — Preparation: The vehicle must be completely decontaminated. Step 1: Thorough pre-wash with a high-foaming shampoo. Step 2: Iron remover treatment of all metal surfaces (paint, wheels). Step 3: Tar removal on sills and lower door areas. Step 4: Clay bar treatment if the surface still shows roughness after iron remover. Step 5: Polishing pass — for new vehicles, SONAX PROFILINE PerfectFinish is sufficient; for used vehicles, first compound (e.g., FS 05-04) then PerfectFinish. Step 6: IPA wipe over all areas for complete degreasing.

Phase 2 — BaseCoat application: In a controlled environment (20–25 °C, hall, no direct sunlight), apply the BaseCoat with one of the enclosed applicator pads in thin, even cross-hatch strokes on panel sizes of approx. 40×50 cm. Lightly dampen the pad (3–4 drops per pad). Immediately wipe edges and transitions with a dry microfiber cloth. Observe waiting time according to the product data sheet (typically 2–5 minutes after the last panel). Change cloth if it becomes difficult to maneuver — dried BaseCoat residue leaves streaks. After complete BaseCoat application: Observe waiting time until GlossCoat application.

Phase 3 — GlossCoat application: Take a new pad, apply GlossCoat thinly using the same methodology. The GlossCoat has a shorter removal time than the BaseCoat — work quickly and efficiently panel by panel. Change wiping cloth frequently. After complete application: Do not move the vehicle for at least 24 hours, do not allow it to get wet, do not touch. First gentle hand wash no earlier than 72 hours. Full load capacity after 7–14 days.

Areas of application for CC Evo — for which vehicles and customers the system is intended

The CC Evo is the product for vehicles where maximum paint protection over a long period is a priority. New vehicles in the premium and luxury segment: Here, the extra effort of the two-stage system is worthwhile because the vehicle value justifies the higher maintenance effort and the customer often drives the same vehicle for many years. Sports cars and exotics: Vehicles that are frequently shown at events and are subject to direct light inspection benefit from the superior gloss effect of the GlossCoat. Vehicles in demanding environments: Operators in rural areas (higher stone chips), coastal regions (salt air), or industrial environments (fallout) benefit from the denser protective layer of the two-stage system.

For detailing studios, the CC Evo is the premium offering that justifies the highest price range in the service portfolio: Customers who pay €500–€1500 or more for a vehicle sealant expect a system with maximum performance and documented durability. The CC Evo set with 150 ml and 4 pads provides the material for one vehicle; the service itself typically includes 8–16 hours of labor for preparation and coating. The material component in the total price is therefore manageable — the added value is created by the detailer's expertise and consistent preparation.

Important: The CC Evo is not suitable for inexperienced home users without experience in ceramic coating. Those who are new to ceramic coatings should start with the single-stage CC One or the CC Pro to develop a feel for the application before using the more complex two-stage system on a higher-value vehicle.

CC Evo vs. CC Pro in direct comparison — when is the upgrade worthwhile?

The decision between the SONAX PROFILINE CeramicCoating CC Pro (single-stage, up to 4 years) and the SONAX PROFILINE CeramicCoating CC Evo (two-stage, up to 5 years) depends on several factors. Vehicle value: High-value vehicles from approx. €50,000 benefit from the upgrade to CC Evo — the price difference between CC Pro and CC Evo is marginal in relation to the vehicle value, but the additional performance in durability and optics is noticeable. Protection duration: Anyone who keeps the vehicle for 5+ years and does not plan a re-coating during this time is better off investing in the CC Evo system with 5 years of durability.

Time availability: The two-stage system requires more time for application (approx. 30–60 minutes more than CC Pro) and a controlled environment for the precise timing between BaseCoat and GlossCoat. For businesses with tight schedules and high vehicle throughput, the CC Pro may be more economical. Experience level: For first ceramic coating projects, the CC Pro is easier to handle; the CC Evo requires a feel for material processing. Summary: CC Pro is the economically and qualitatively balanced all-round system; CC Evo is the system for maximum performance without compromise.

Buy SONAX PROFILINE CeramicCoating CC Evo — scope of delivery, target group, and conclusion

The SONAX PROFILINE CeramicCoating CC Evo is available as a complete set with 150 ml (BaseCoat + GlossCoat combined) and 4 application pads. The division of the content into BaseCoat and GlossCoat is already done by the product; the exact quantity ratios are indicated on the packaging. 150 ml in total is amply dimensioned for a normal passenger car — with correct, economical dosing, there is buffer material for rework or more difficult areas. For larger vehicles (SUV, van), we recommend calculating the dosage closely and consciously planning for a quantity reserve.

Target group: Professional detailing studios with ceramic coating experience; automotive dealer premium service for new vehicles; customers for personal use who have already applied CC One or CC Pro and are looking for the next level of performance. The CC Evo is the right product when maximum protection duration, superior gloss, and professional reliability are the decision criteria.

Conclusion: The SONAX PROFILINE CeramicCoating CC Evo is the flagship ceramic coating in the SONAX PROFILINE range — a system that demands everything in preparation, application, and aftercare, but rewards with the best result that SONAX has developed for professional paint protection. Five years of protection, maximum gloss, proven chemistry.