Koch-Chemie × THE FINISHER THE FINISHER "WaxPolish" Wax Polish 250ml

THE FINISHER × Koch-Chemie „WaxPolish“ — Wax Polish for a Rich Gelcoat Finish

What makes WaxPolish ideal on board? — The marine wax polish visibly enhances gelcoat and glossy paint surfaces, optically smooths fine hazing, and leaves a uniform, water-repellent wax film. Easy to buff, durable in everyday use, perfect after routine washing.

THE FINISHER WaxPolish Wax Polish is your quick shine and protection upgrade for boats: on smooth gelcoat and high-gloss painted surfaces, it creates a rich, calm deep gloss and a thin, hydrophobic protective film. Ideal after cleaning with CleanMarine or light pre-polishing work – as a standalone finish before your next trip. Application remains forgiving, the appearance is even, and the surface feels clean and smooth.

• Rich Deep Gloss on Gelcoat: optically smooths the appearance, conceals fine hazing, and allows water to run off cleanly.
• Easy Handling: creamy application, short flash-off time, streak-free buffing – even on larger panels.
• System Fit on Board: apply after CleanMarine/polishing; later "boost" hydrophobicity with BodyGuard without overriding the wax.

Gelcoat Wax Polish – Shine, Smoothness & Protection in One Step

Gelcoat Wax Polish means optically calming the surface while simultaneously building a thin, protective film. THE FINISHER WaxPolish Wax Polish works as a finely tuned wax formula: mild cleaning components remove light oxidation haze, the polishing phase smooths the microstructure, the wax film flashes off evenly and promotes beading/sheeting. Result: a rich, deep appearance without a greasy look. On intact gelcoat, one application is often sufficient; for visibly dull areas, a prior correction with RoughCut/FineCut or the one-step solution PerfectOne is recommended – after which WaxPolish seals the result.

Application on Board – Preparation, Application, Buffing

Application begins with a clean base: wash the boat in the shade with CleanMarine, then dry. Apply THE FINISHER WaxPolish Wax Polish thinly to a soft pad/cloth, spread panel by panel in a cross-hatch pattern, and allow to flash off briefly. As soon as the film appears "clear," buff off streak-free with a fresh microfiber side. Work in sections on large surfaces, avoiding edges and fittings. Do not apply on heated surfaces or in direct sunlight, and never allow the product to dry. Plastics, non-skid decks, vinyl, and textile elements are excluded – for these, RubMarine, VinylGuard, or TexLock/CoverGuard are available.

Durability & Care Plan – Smartly Combining Wax Finish

Durability & Care Plan are based on usage (sun, salt, mooring time). If you regularly maintain with CleanMarine, the finish remains visibly calmer, and dirt adheres less. Between washes, you can refresh hydrophobicity with BodyGuard without changing the wax appearance. Remove light water spots after rinsing with a clean cloth; treat stronger salt rims briefly before the next wax application. In case of noticeable loss of gloss: clean the surface, optionally polish selectively, then apply THE FINISHER WaxPolish Wax Polish thinly again and buff out – rather two thin applications than one "heavy" application.

Frequently Asked Questions about THE FINISHER × Koch-Chemie "WaxPolish" — Wax Polish

On which surfaces do I use WaxPolish?

On smooth gelcoat and high-gloss painted surfaces on board. Do not use on non-skid decks, matte gelcoat areas, vinyl, textiles, or plastic windows.

Do I need to polish beforehand?

Only for dull, aged, or visibly scratched areas. Intact surfaces can be refined directly with WaxPolish after washing with CleanMarine.

How do I prevent streaks?

Work thinly, apply in the shade, allow to flash off briefly, and buff out completely with a fresh microfiber side. Immediately wipe off any excess.

Is WaxPolish compatible with BodyGuard?

Yes. WaxPolish sets the optical base tone, BodyGuard later refreshes hydrophobicity. Sequence: first wax-based polish, then spray protection (if necessary, with a time delay).

How often should I refresh?

Depending on use. With regular washing, a wax refresh per season is often sufficient; more often with a lot of salt/sun. Apply thinly, do not "build up" layers.

Last updated: 01.11.2025 — Author: Daniel (Detailing1)