{"product_id":"sonax-profiline-ceramiccoating-cc-one-paint-keramikversiegelung","title":"PROFILINE CeramicCoating \"CC\" One (Paint) Ceramic Coating","description":"\u003ch2\u003eApplying permanent ceramic protection to clear coat — SONAX PROFILINE CeramicCoating CC One\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does the SONAX PROFILINE CeramicCoating CC One do? The professional SiO2 ceramic sealant for vehicle paintwork builds a hard, hydrophobic protective layer on the clear coat — for long-lasting shine, increased scratch resistance, and easy paint care after coating.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eCeramic coatings have fundamentally changed professional vehicle detailing in recent years: instead of regular wax and polymer sealants, which degrade after a few months, a professionally applied SiO2 ceramic coating offers multi-year protection, superior hydrophobicity, and measurably higher resistance to everyday influences. The \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC One\u003c\/strong\u003e is the professional single-coating solution for clear coat from the SONAX PROFILINE range: easier to apply than two-stage systems, more powerful than polymer sealants, and designed for professional detailers who want to offer their customers durable paint protection at the highest level.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSiO2 ceramic layer for multi-year paint protection.\u003c\/strong\u003e The ceramic coating is based on silicon dioxide (SiO2), which chemically bonds with the clear coat after application, forming a glassy, hard protective layer. This layer is significantly more durable than wax (lasts a few weeks) or polymer sealants (lasts 3–9 months) and also offers higher resistance to UV radiation, mild acids (bird droppings, industrial fallout), and heat. The result is paintwork that degrades less over years and accumulates fewer swirl marks from dirt-washing contact.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePronounced hydrophobicity and lotus effect after coating.\u003c\/strong\u003e One of the most visible properties of a freshly applied ceramic coating is its extremely hydrophobic surface: water droplets completely bead off the coated paint, taking dirt particles with them (self-cleaning effect) and leaving hardly any stains after drying. This effect significantly simplifies vehicle care after coating — dirt adheres less, water spots are rarer, and regular washing intervals can be extended without damaging the paint.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncreased scratch resistance and deeper gloss effect.\u003c\/strong\u003e The glassy SiO2 protective layer is harder than the clear coat underneath and protects it from fine scratches caused by washing, dust particles, and light mechanical contact. At the same time, the highly refractive ceramic layer improves the optical gloss effect of the paint: light is reflected more strongly, the paint depth appears more intense, and dark paints (black, dark blue) particularly benefit from the intensification of deep gloss by the ceramic coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e The CC One requires a flawlessly prepared surface — the coating seals the paint in its current state and permanently makes any remaining imperfections visible. Therefore, first complete decontamination (iron, tar, clay) and paint correction (polishing), then a panel wipe with \u003ca href=\"\/en\/products\/sonax-profiline-prepare-reiniger-kontrollspray-entfetter\"\u003eSONAX PROFILINE Prepare\u003c\/a\u003e, and only then apply the ceramic coating. Application is done with the included applicator pad in small, crosswise strokes — thinly and evenly. No polishing pressure, no rubbing; the chemistry does the work. Leveling time 1–5 minutes depending on temperature and humidity, then wipe off with a clean, soft microfiber cloth. Work on dark coated surfaces in the right light to immediately detect high spots (overlap marks). Clean tools immediately after coating with isopropanol — cured ceramic coating cannot be removed.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSiO2 Ceramic Chemistry — How CC One Protects and Bonds Paint Permanently\u003c\/h3\u003e\n\u003cp\u003eThe principle of operation of the \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC One\u003c\/strong\u003e is based on a chemical bonding reaction between the SiO2 polymer in the coating liquid and the vehicle's clear coat. When the coating is applied to the paint surface, the reactive silanol groups (Si-OH) in the coating formula react with hydroxyl groups on the clear coat surface — this condensation reaction creates covalent oxygen bridges (Si-O-Si) between the coating polymer and the clear coat material. The result is not just a physically applied layer, but a chemically bonded protective matrix.\u003c\/p\u003e\n\u003cp\u003eThis chemical bond is the decisive advantage of ceramic coatings over wax and polymer sealants: waxes and polymers adhere only physically (van der Waals forces) and are slowly removed by washing, UV radiation, and heat. The silicon dioxide layer of CC One is chemically bonded to the clear coat and is much more resistant to the factors that degrade physically adhering sealants. The durability of a professionally applied ceramic coating depends on the quality of preparation, application quality, and care conditions — well-executed CC One applications last several years.\u003c\/p\u003e\n\u003cp\u003eThe hardness of the cured ceramic layer is often specified on the Mohs scale or in the unit \"9H\" (pencil hardness). The SiO2 layer is indeed harder than clear coat (typically 4–5H), but it is not indestructible — deep scratches from sharp objects or coarse abrasives can penetrate the ceramic layer. The protective effect lies less in absolute scratch resistance than in its sacrificial layer function: fine everyday scratches (washing scratches, light scuffs) damage the ceramic layer instead of the underlying clear coat. Since the ceramic layer is polishable, superficial scratches in the coating can be removed by repolishing without touching the clear coat.\u003c\/p\u003e\n\n\u003ch3\u003eApplying CC One Correctly — Step-by-Step to the Perfect Ceramic Finish\u003c\/h3\u003e\n\u003cp\u003eThe application of a ceramic coating is more precise and less error-tolerant than the application of wax or polymer sealants. Step 1 — Surface preparation: Paint correction completed, surface completely degreased and clean. No dust, no fingerprints, no polishing oil residues. An ideal working environment is free of drafts and dust (garage, workshop) at 15–25 °C and moderate humidity. In very high humidity (above 80%), the curing reaction can be accelerated, which shortens working time and makes removal errors more likely.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Application: Apply a few drops of the coating liquid to the included applicator block (suede applicator pad) — do not overdose, an even film of little liquid is more effective than a lot of liquid that creates overlapping layers. Guide in criss-cross paths (horizontal, then vertical) over the panel — each path should overlap the previous one by about 30% to ensure seamless coverage. The coating is applied transparently and thinly — no visible wet film.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Leveling and removal: After 1–5 minutes (temperature-dependent), the coating begins to set and visible refraction lines (rainbow effect, haze) appear on the surface — this is the correct time for removal. Lightly wipe off with a soft, clean microfiber cloth (e.g., SONAX PROFILINE Coating Towel) and polish to a finish with a second fresh cloth. Work on the bodywork section by section: roof, hood, trunk lid, then side panels, and finally bumpers. After complete application, do not wet the vehicle for 12–24 hours to allow for full initial curing.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application for CC One — For Which Vehicles and Use Cases\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC One\u003c\/strong\u003e is designed for vehicle paintwork (clear coat) on all body parts and covers the entire range of paints: acrylic clear coats, PU clear coats, matte special paints (on matte paints, the hydrophobicity effect is different; testing in an inconspicuous area is recommended) and freshly painted surfaces after complete curing (usually 4–6 weeks after repainting, so that the clear coat has fully outgassed). For carbon fiber exposed surfaces, polished metals, and glass surfaces, the material-specific PROFILINE CC products should be used instead.\u003c\/p\u003e\n\u003cp\u003eThe CC One is particularly suitable for vehicle owners and detailers who are looking for long-term protection and are willing to invest one-time time and care in a professional application. For vehicles with dark paintwork (black, dark blue, dark gray), where swirl marks and water spots are particularly noticeable, ceramic coating is the most effective solution: hydrophobicity prevents water spot formation, hardness reduces swirl marks from washing, and the deep gloss effect is particularly impressive on dark paintwork. For vehicles that are in daily use and have little time for extensive care, an annual refresh of the hydrophobicity effect with a coating shampoo is sufficient.\u003c\/p\u003e\n\u003cp\u003eFor detailers and reconditioning businesses, the CC One is a premium service offering that clearly sets itself apart from standard wax services. The combination of visible gloss results, proven durability, and the premium price segment makes ceramic coatings the most profitable single service in many reconditioning businesses. The one-time material consumption (40 ml is sufficient for a mid-range vehicle) and the professional application time of 2–4 hours (including preparation) are clearly defined for the market.\u003c\/p\u003e\n\n\u003ch3\u003eCC One in Comparison — Ceramic Sealants in the SONAX PROFILINE Range\u003c\/h3\u003e\n\u003cp\u003eThe SONAX PROFILINE range offers several ceramic sealants for different requirements and price ranges. The \u003cstrong\u003eCC One\u003c\/strong\u003e positions itself as a professional single-coating solution with good value for money and easy single-layer application — ideal for professionals who regularly coat vehicles and want a reliable, high-quality result without the effort of a two-stage system. The \u003ca href=\"\/en\/products\/sonax-profiline-ceramiccoating-cc-pro-paint-keramikversiegelung\"\u003eSONAX PROFILINE CeramicCoating CC Pro\u003c\/a\u003e is the next higher product in the CC range, offering stronger protective performance and even longer durability — for vehicles where maximum performance is the goal.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-hybridcoating-cc-one-keramikversiegelung\"\u003eSONAX PROFILINE HybridCoating \"CC One\"\u003c\/a\u003e is an interesting alternative for users who are looking for easy application and professional results without the surface preparation requirements of a pure SiO2 coating. The HybridCoating is somewhat more forgiving in application and is suitable for businesses that want to achieve good sealing quality in a shorter amount of time. The choice between CC One and HybridCoating depends on customer expectations, the available time budget, and the vehicle's price segment.\u003c\/p\u003e\n\u003cp\u003eFor detailers who want to offer the complete SONAX PROFILINE ceramic care system, we recommend combining CC One for standard cases, CC Pro for premium vehicles, and HybridCoating for quick coating applications. Supplemented by the material-specific sealants (CC Glass, CC Rim, CC Vinyl+PPF), a complete vehicle sealing (100% of all exposed surfaces) can be carried out based on the SONAX PROFILINE system — a systematic positioning that strengthens customer confidence in the detailing business's consulting expertise.\u003c\/p\u003e\n\n\u003ch3\u003eBuying SONAX PROFILINE CeramicCoating CC One — Contents and Application Recommendation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC One\u003c\/strong\u003e is available in 40 ml including two applicator pads. The 40 ml container is sufficient for one to two complete vehicle applications (mid-range passenger car), depending on vehicle size and application efficiency. For larger vehicles (SUV, van) or very thin application, a 40 ml unit can also be completely used for a single vehicle. The included applicator pads are matched to the CC One formula and should not be replaced by other applicators, as the applicator surface influences dosage and distribution.\u003c\/p\u003e\n\u003cp\u003eFor detailing businesses that regularly coat vehicles, we recommend keeping several units in stock and using fresh material for each vehicle preparation — ceramic coatings can thicken due to humidity after opening and lose application quality. Unopened bottles last several years when stored cool and dry (15–25 °C, airtight). After opening, any remaining coating in the bottle should be protected with a nitrogen spray (gassing-out) if it is not immediately used completely.\u003c\/p\u003e\n\u003cp\u003eIn summary, the SONAX PROFILINE CeramicCoating CC One is the right choice for any detailer and reconditioning business that offers professional long-term paint protection as a core service. The SiO2 technology, easy single-layer application, and proven PROFILINE product system make the CC One a reliable basis for high-quality ceramic coating services.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"40ml + 2x application pads","offer_id":54076730540367,"sku":"D1-SNX-2678410","price":62.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-ceramiccoating-cc-one-paint-keramikversiegelung_40ml.png?v=1735294386","url":"https:\/\/detailing1.at\/en\/products\/sonax-profiline-ceramiccoating-cc-one-paint-keramikversiegelung","provider":"Detailing1","version":"1.0","type":"link"}