{"product_id":"koch-chemie-the-finisher-marine-finecut-schritt-2-politur","title":"THE FINISHER \"FineCut\" Step 2 Polish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „FineCut“ — Step 2 Polish for a Clear, Hologram-Free Finish\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use FineCut for? — As a step 2 polish after a coarse cut, FineCut removes hazing and holograms, visibly clarifies the paint, and prepares a high-gloss, clean finish for sealing – quickly, with low dust, and reproducibly.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER FineCut Step 2 Polish\u003c\/strong\u003e is your precise refinement step after defect correction. It removes cutting marks, gray haze, and light swirls from the clear coat, buffs out smoothly, and leaves a calm, high-gloss appearance – the perfect bridge between coarse correction (\u003cem\u003eRoughCut\u003c\/em\u003e) and protective layer (\u003cem\u003eBodyGuard\u003c\/em\u003e or wax-based finishes). In practice, this means less rework, clean wipe-off, and reliable results on common OEM clear coats – ideal for daily drivers, sales preparation, and \"clearing up\" after spot corrections.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargeted Refinement:\u003c\/strong\u003e removes holograms and cutting haze, sharpens reflections, creates a calm, rich paint finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePleasant Application:\u003c\/strong\u003e long open time, low-dust matrix, easy buffing – ideal for orbital workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Logic:\u003c\/strong\u003e perfect after \u003cem\u003eRoughCut\u003c\/em\u003e, then protect (e.g., \u003cem\u003eBodyGuard\u003c\/em\u003e); for quick all-in-one jobs, \u003cem\u003ePowerSpeedPolish\u003c\/em\u003e is available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eStep 2 Polish – Micro-Abrasives, Oil Matrix \u0026amp; Finish Stability\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2 Polish\u003c\/strong\u003e means: controlled abrasion with fine finishing characteristics. FineCut's micro-abrasives attack residual defects from the cut, break down evenly, and leave a very fine finish. The moderately oily carrier matrix keeps the pad \"open\" for a long time, reduces drying out, and supports streak-free wiping. The result is a clear, crisp gloss without \"milky\" areas and with significantly reduced holograms – the ideal starting point for any sealant. Because FineCut doesn't leave excessive fillers, the finish remains stable and doesn't degrade after the first wash.\u003c\/p\u003e\n\u003ch3\u003eAutomotive Workflow – Pad Selection, Pressure, Crosshatch \u0026amp; Buffing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive Workflow\u003c\/strong\u003e: After pre-wash (TropicSnow), hand wash (MagicShampoo), and if necessary, a coarse step with RoughCut, work panel by panel. Start with a medium-hard foam pad; for sensitive, soft clear coats, switch to a soft finishing pad; for durable paints, a medium-firm foam can improve bite. Prime the pad thinly, apply 3–4 drops of product, spread on a low setting, then polish in an even crosshatch pattern with moderate pressure until the film visibly and tangibly becomes \"thin\". Finally, reduce pressure and throw slightly (\"jeweling\") to achieve the last trace of gloss. Handle edges and fresh paints carefully, avoid or mask plastics. Remove residues completely with a fresh, dense microfiber – the finish should appear dry, clear, and cloud-free. Then seal according to your goal: fast and hydrophobic with BodyGuard, classically deep glossy with ShineSpeedPolish as a wax-based finish, or \"pop it up\" with JustPerfect in between.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; Limits – Paint Hardness, One-Step Alternative \u0026amp; Protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility \u0026amp; Limits\u003c\/strong\u003e: FineCut works excellently on most OEM clear coats – on very hard paints, it may require a longer pass or a slightly more aggressive pad; on very soft paints, a gentle, short follow-up with a soft pad helps. If time is short and defect removal \u003cem\u003eand\u003c\/em\u003e finish in one step are required, choose \u003cem\u003ePowerSpeedPolish\u003c\/em\u003e as a one-step. If only fine wash marks are present and protection is desired, \u003cem\u003eShineSpeedPolish\u003c\/em\u003e (wax polish) is often sufficient. Do not polish matte paints\/wraps or PPF – you would unintentionally change the matte level\/glossy look. After FineCut, a protective layer should always be applied to the clean finish: \u003cem\u003eBodyGuard\u003c\/em\u003e for durable hydrophobicity or – if desired – a waxy finish. Clean towels, cool panels, and shade are mandatory; if a pad dusts, it's overfilled – blow it out or change it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie „FineCut“ — Step 2 Polish\u003c\/h2\u003e\n\u003ch4\u003eHow does FineCut differ from RoughCut?\u003c\/h4\u003e\n\u003cp\u003eRoughCut is for coarse defect removal (Step 1), FineCut refines afterwards: it removes haze\/holograms and brings clarity to the finish. Both build on each other.\u003c\/p\u003e\n\u003ch4\u003eOrbital or Rotary?\u003c\/h4\u003e\n\u003cp\u003eOrbital provides the safest, hologram-free result. Use rotary only if experienced and calm the surface with a short orbital finishing pass.\u003c\/p\u003e\n\u003ch4\u003eDoes FineCut dust?\u003c\/h4\u003e\n\u003cp\u003eWith correct dosage, cool panels, and clean pads, it's low-dust. Dust usually occurs due to overfilled pads or too much heat – regularly blow out\/change pads.\u003c\/p\u003e\n\u003ch4\u003eCan I seal directly afterwards?\u003c\/h4\u003e\n\u003cp\u003eYes. Remove residues completely and then seal with BodyGuard or – if desired – apply a waxy tone with ShineSpeedPolish\/WaxPolish.\u003c\/p\u003e\n\u003ch4\u003eAlso suitable for gelcoat?\u003c\/h4\u003e\n\u003cp\u003ePunctually yes, e.g., after stronger steps, but large gelcoat areas are more efficiently worked with PerfectOne (one-step) and then protected with WaxPolish\/BodyGuard.\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56301049971023,"sku":"D1-KCX-77102","price":16.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-marine-finecut-schritt-2-politur_250ml_77102-250ML-01.png?v=1761918686","url":"https:\/\/detailing1.at\/en\/products\/koch-chemie-the-finisher-marine-finecut-schritt-2-politur","provider":"Detailing1","version":"1.0","type":"link"}