{"product_id":"gyeon-q2m-tar-redefined-harzentferner-teerentferner","title":"Q²M Tar (REDEFINED) Resin \u0026 Tar Remover","description":"\u003ch2\u003eResin, tar, adhesives – GYEON Q²M Tar shifts what a normal wash leaves behind\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eHow do I get tar and resin off the paint without damaging it?\u003c\/strong\u003e\u003cbr\u003e\nTar and resin spots are stubborn, sticky contamination you can barely shift by hand – rub without the right solvent and all you get is scratches. GYEON Q²M Tar works with a solvent-based active that softens tar, tree sap, glue residue and similar organic contamination until it wipes off clean with next to no pressure. No scrubbing, no scraping – just spray it on, let it dwell, wipe it off.\n\u003c\/blockquote\u003e\n\n\u003cp\u003eTar spray off the motorway, tree sap after parking under the oak, glue residue from a sticker you peeled off – that's the kind of contamination a normal car wash simply can't touch. GYEON Q²M Tar is a professional resin and tar remover that dissolves this stubborn contamination chemically and lifts it away without a trace. Paint-safe, fast-acting and no aggressive rubbing needed – the go-to for anyone who wants their paint properly clean.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifts it without scrubbing:\u003c\/strong\u003e The solvent formula softens tar, resin and adhesive enough that a clean microfibre towel wipes them off completely – no pressure that would put scratches in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad hit list:\u003c\/strong\u003e Works on tar spray, tree sap, bitumen residue, glue leftovers and similar organic contamination – one bottle for a lot of problem spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint-safe when used right:\u003c\/strong\u003e The formula is tuned for painted surfaces and leaves no damage when used properly – not on coatings or sealants either.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eDaniel's tip:\u003c\/strong\u003e Always use Q²M Tar on a cool, shaded panel – solvents flash off too fast in the sun and can leave residue behind. Stick to the 1–2 minute dwell time, then dab it off with a clean microfibre towel, don't wipe. If the resin is being stubborn, run it once more rather than leaning on it with pressure. After you're done, give the area a thorough wash with the \u003ca href=\"\/en\/products\/gyoen-q2m-restartwash-dekontaminations-shampoo\"\u003eGYEON Q²M RestartWash\u003c\/a\u003e.\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eWhy tar and resin are such a pain\u003c\/h3\u003e\n\u003cp\u003eTar spray off the road and tree sap have one thing in common: they're sticky, tough and cure under UV. Tar is a mix of aromatic hydrocarbons that go liquid in the heat and cling to painted surfaces. Tree sap carries terpenes and resin acids that cross-link under UV light and only get harder over time. Take them off mechanically without a proper solvent and you'll pull scratches for sure – the contamination is harder than the paint and acts like sandpaper.\u003c\/p\u003e\n\u003cp\u003eThe right product breaks the contamination down chemically first, loosens its grip and only then lets you dab it away. GYEON Q²M Tar is built exactly for that – the solvent content gets under the tar or resin layer, breaks its bond to the paint and lets you lift it off gently, without a single scratch.\u003c\/p\u003e\n\n\u003ch3\u003eStep by step\u003c\/h3\u003e\n\u003cp\u003eGive the car a normal wash before you reach for Q²M Tar, so you clear off any loose surface dirt. Leave the affected spot dry or lightly damp – whichever the product instructions call for. Spray Q²M Tar straight onto the contamination and let it dwell for one to two minutes. Dab it off with a clean, soft microfibre towel, don't rub – that way the dissolved contamination lifts into the towel instead of getting smeared across the surface.\u003c\/p\u003e\n\u003cp\u003eOn stubborn leftovers, just run it again. Never lean on it with pressure – Q²M Tar is built so that patience and chemistry do the work, not muscle. When you're done, rinse the area well and wash it with a shampoo to clear off any last solvent residue.\u003c\/p\u003e\n\n\u003ch3\u003eWhere Q²M Tar sits in the decon process\u003c\/h3\u003e\n\u003cp\u003eIn a professional decon workflow Q²M Tar has a clear slot: it comes after the regular wash and the iron remover step, but it targets the organic contamination that iron remover doesn't touch. The full three-stage process – wash, iron remover (or \u003ca href=\"\/en\/products\/gyoen-q2m-restartwash-dekontaminations-shampoo\"\u003eRestartWash\u003c\/a\u003e as an all-in-one), tar and resin remover – sets a painted surface up perfectly for polishing and sealing.\u003c\/p\u003e\n\u003cp\u003eIf you make Q²M Tar a regular part of your car care – say as a full seasonal decon in spring and autumn – you stop chronic layers of contamination building up, the kind that wear down paint and coatings over the long run.\u003c\/p\u003e\n\n\u003ch3\u003ePlaying nice with coatings and sealants\u003c\/h3\u003e\n\u003cp\u003eA question that comes up a lot: does Q²M Tar attack the coating? Used right and rinsed off properly, no. The solvent component is chosen to dissolve tar and resin without permanently harming cured SiO₂ layers. That said: always wash coated panels down thoroughly after the tar step and, where you can, top them up with a QuickDetailer.\u003c\/p\u003e\n\u003cp\u003eOn very fresh coatings (within the first 48 hours) leave Q²M Tar alone and spot-treat with a neutral isopropyl-alcohol-and-water mix instead. Once the coating is fully cured, Q²M Tar is nothing to worry about.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Tar in the bigger paint-care picture\u003c\/h3\u003e\n\u003cp\u003eTar and resin are often the invisible cause behind paint problems that look at first glance like polishing mistakes or a failed coating. No coating will bond properly on a surface still fouled with tar residue, and no polish will do its best work there. GYEON Q²M Tar lays the chemical groundwork for every care step that follows.\u003c\/p\u003e\n\u003cp\u003eIf you then want to clear iron particles off the car too, you can pair Q²M Tar with the \u003ca href=\"\/en\/products\/gyeon-q2m-waterspot-kalkfleckenentferner\"\u003eGYEON Q²M WaterSpot\u003c\/a\u003e for limescale spots. The full decon process – mechanical, chemical-organic, chemical-inorganic – leaves a painted surface that's genuinely ready for the best detailing has to offer.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57015787454799,"sku":"D1-GYEON-Q2MTAR1000","price":39.94,"currency_code":"EUR","in_stock":true},{"title":"500ml","offer_id":57015787487567,"sku":"D1-GYEON-Q2MTAR500","price":24.41,"currency_code":"EUR","in_stock":false},{"title":"4 liters","offer_id":57015787520335,"sku":"D1-GYEON-Q2MTAR4000","price":126.46,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-tar-redefined-harzentferner-teerentferner.png?v=1770846350","url":"https:\/\/detailing1.at\/en\/products\/gyeon-q2m-tar-redefined-harzentferner-teerentferner","provider":"Detailing1","version":"1.0","type":"link"}