{"product_id":"gyeon-q2m-ppf-renew-politur-lackschutzfolie","title":"Q²M \"PPF\" Renew Polish for Paint Protection Film","description":"\u003ch2\u003eRefresh PPF instead of replacing – GYEON Q²M PPF Renew\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M PPF Renew? GYEON Q²M PPF Renew is a specialized polish for paint protection films – it removes fine scratches, swirl marks, and oxidation from the PPF surface and restores the film's original clarity and appearance without damaging the material.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eEven the best paint protection film shows signs of wear after a few years: fine scratches from washing and brush contact, slight haziness from UV exposure, dried-on dirt that dulls the surface. \u003cstrong\u003eGYEON Q²M PPF Renew\u003c\/strong\u003e is the targeted answer – a polish specifically developed for the softer PU\/TPU surface of paint protection films that gently eliminates defects without damaging or thinning the film.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGently removes fine scratches and swirl marks from the PPF surface.\u003c\/strong\u003e PPF films are softer than car paint – a normal car polish would damage the film or even polish right through it. Q²M PPF Renew is designed for the specific material hardness of polyurethane and removes defects without overstressing the material.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRestores clarity and appearance of dulled films.\u003c\/strong\u003e UV radiation and oxidation can dull and yellow PPF over time. PPF Renew contains special conditioners that revitalize the film and restore transparency – the PPF looks like new again.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePreparation for PPF coating application.\u003c\/strong\u003e Before applying \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e or other coatings to the film, Q²M PPF Renew creates an optimal surface – clean, defect-free, and prepared for coating adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Apply Q²M PPF Renew best by hand or with a polishing machine on a low setting with a soft polishing pad. For PPF polishing, less is more – too much machine pressure can heat and stretch the film. Degrease with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e after polishing and then ideally apply \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e directly for lasting protection.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhen is Q²M PPF Renew the right choice?\u003c\/h3\u003e\n\u003cp\u003ePPF Renew is used when the PPF film shows visible signs of wear but is still structurally intact. Typical application scenarios: fine wash scratches on the film surface (especially visible on dark paints), slight haziness due to UV aging or water spots, dried-on insects or bird droppings that have left streaks, as well as before applying a PPF sealant for an optimal surface. If the film shows deep cracks, delamination, or severe yellowing, replacing the affected film areas is the better choice – Renew cannot repair structural damage.\u003c\/p\u003e\n\n\u003ch3\u003eApplication: Correctly use PPF Renew\u003c\/h3\u003e\n\u003cp\u003eThoroughly clean the film before polishing and remove all loose dirt. Apply Q²M PPF Renew to a soft microfiber cloth or a finishing polishing pad. Apply by hand with circular movements or with a polishing machine on a low setting (1–2). Important: do not use too much machine pressure – PPF films react more sensitively to heat than car paint. After polishing, remove residue with a clean microfiber cloth and degrease the surface with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e. Immediately afterwards, \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschu\"\u003eQ²M PPF Maintain\u003c\/a\u003e can be applied.\u003c\/p\u003e\n\n\u003ch3\u003ePPF Renew for self-healing films: Observe special features\u003c\/h3\u003e\n\u003cp\u003eSelf-healing PPF films (Self-Healing TPU) have the property of self-closing fine scratches through the application of heat. Before using Q²M PPF Renew on self-healing films, check whether existing scratches have already disappeared through self-healing – sometimes hot water or sun warmth is sufficient. If the scratches do not self-heal (for deeper defects or colder temperatures), Q²M PPF Renew can be used. The polish is also compatible with self-healing films and does not damage the self-healing property.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M PPF Renew vs. normal car polish: Why the difference is important\u003c\/h3\u003e\n\u003cp\u003eA normal car polish – whether compound or finishing polish – is formulated for harder clear coat surfaces. On PPF, this leads to two problems: Either the abrasiveness is too low and the defects are not removed, or it is too high and the softer film is excessively abraded or damaged. Q²M PPF Renew is precisely matched to the material hardness of PU\/TPU films – for optimal defect removal without risk. For normal paint surfaces next to the PPF, we recommend \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase recommendation: PPF Renew for PPF owners and detailers\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M PPF Renew is worthwhile for anyone who wants to revive a dulled or scratched PPF film without prematurely replacing the costly film. The polish often pays for itself with the first application – when the hazy hood is clear again and the fine scratches have disappeared. As a complete PPF renovation kit, we recommend: Q²M PPF Renew for polishing, \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e for degreasing, \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e for ceramic coating, and \u003ca href=\"\/en\/products\/gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschu\"\u003eQ²M PPF Maintain\u003c\/a\u003e for ongoing care.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57335243178319,"sku":"D1-GYEON-Q2MPPFRNW1000","price":54.46,"currency_code":"EUR","in_stock":true},{"title":"4 fl. oz.","offer_id":57335239377231,"sku":"D1-GYEON-Q2MPPFRNW120","price":16.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-ppf-renew-politur-lackschutzfolie.png?v=1774651431","url":"https:\/\/detailing1.at\/en\/products\/gyeon-q2m-ppf-renew-politur-lackschutzfolie","provider":"Detailing1","version":"1.0","type":"link"}