FLEX "WL 300 18.0" LED Cordless Hand Lamp (18V) 1 Stück

FLEX WL 300 18.0 LED Cordless Hand Lamp — 300 Lumens, 18V and 104° Swiveling Lamp Head for Mobile Workshop Use

What is the FLEX WL 300 18.0 LED Cordless Hand Lamp? The FLEX WL 300 18.0 is a cordless 18V LED hand lamp with 300 lumens in two brightness levels, a 104° swiveling lamp head, and an integrated metal bracket — compatible with all FLEX 18V battery packs for flexible use in workshops, vehicle preparation, and mobile detailing operations.

In everyday detailing, there are lighting situations where a large inspection lamp is too bulky, and a headlamp doesn't provide enough lumens. Engine bay inspections, checks under the vehicle, peeking into door jambs and narrow body cavities — these are tasks for which a compact, handy cordless hand lamp is the right choice. The FLEX WL 300 18.0 LED Cordless Hand Lamp fills precisely this gap in the FLEX lighting portfolio: 300 lumens, 18V system compatibility, and a swiveling lamp head in a device weighing less than 400g.

The FLEX WL 300 18.0 is part of the FLEX 18V battery system and shares the same battery packs with the 18V polishers, the BW 18.0-EC blower, and the DWL 2500 full-spectrum lamp. Those already in the FLEX 18V system immediately have the necessary battery for the WL 300 — no additional battery purchase, no additional charger. Just plug and go.

The device is deliberately focused on the essentials: two brightness levels (150 and 300 lumens), a 104° swiveling lamp head for optimal angle positioning, and an integrated metal bracket for hanging or comfortable carrying. Additionally, there is an LED battery level indicator that shows the charge status of the inserted FLEX 18V battery — a useful detail for long working sessions without a power connection.

• 300 lumens in two stages — sufficient for all close-range work situations. The 300 lumens in full-load operation are entirely sufficient for close-range use — engine bay, wheel arch, vehicle interior. In the 150-lumen power-saving mode, the battery life is significantly extended, which is relevant for longer inspection phases without changing batteries. Two brightness levels mean: the right amount of light for the respective situation, without needing a separate device.
• 104° swiveling lamp head — light exactly where it's needed. The 104° swiveling lamp head makes the WL 300 18.0 considerably more flexible than rigid hand lamps. Lying under the vehicle, shining upwards; shining sideways into an engine bay; tilting the lamp head for streak light inspections — all this is possible without changing hand position. For tight situations where you can't always get your hand into the optimal lighting angle, this flexibility is a real advantage.
• Metal bracket and belt clip — portable and positionable at the same time. The integrated metal bracket makes the WL 300 18.0 a hand lamp that can also manage without a hand: it can be hung on hooks, eyelets, or parts of the vehicle structure, illuminating hands-free. The included belt clip makes it readily accessible on the body or tool belt. For the mobile detailer who frequently moves from place to place, both mounting options are welcome in everyday use.

Practical Tip from Detailing1: For engine bay inspection after engine washing, hang the WL 300 18.0 by its metal bracket on one of the hood supports and swivel the lamp head to the area to be inspected. Both hands free for visual inspection, light from the optimal angle — no flashlight you'd have to hold in your teeth. For dirt or water spots after cleaning, 300 lumens at close range is more than enough light for a thorough inspection.

18V System Compatibility — the WL 300 in the FLEX Battery System

The FLEX WL 300 18.0 LED Cordless Hand Lamp is fully integrated into the FLEX 18V battery system. This means that all FLEX 18V battery packs — from the 2.5 Ah compact battery to the 8.0 Ah XLITHIUM battery — power the WL 300. Anyone operating a FLEX 18V polisher, the BW 18.0-EC blower, or the DWL 2500 already has the necessary battery for the WL 300.

System compatibility has direct practical consequences: in everyday workshop use, you don't have to charge and keep a separate battery for the hand lamp. The battery that just came out of the polisher and is still sufficiently charged goes directly into the WL 300 for the final inspection. This reduces the number of batteries needed and significantly simplifies charge management.

The LED battery level indicator on the device shows the charge level of the inserted battery. For jobs without a power connection — at the customer's site or at detailing events — this is important information that prevents the lamp from going out in the middle of an inspection because the battery level wasn't monitored.

The device is supplied without a battery and charger. For those not yet in the FLEX 18V system, we recommend starting with the P-Set 22 Q with two 18V batteries and a charger — this immediately provides sufficient battery capacity for the entire FLEX 18V detailing equipment.

104° Swivel Head and Metal Bracket — Flexible Positioning in Practice

The 104° swiveling lamp head of the FLEX WL 300 18.0 LED Cordless Hand Lamp initially sounds like a technical detail — in practice, however, it is the reason why the lamp is so versatile. 104° corresponds to an angular range that extends from vertically downwards to significantly beyond the horizontal. This means: the WL 300 can be used as a floodlight (lamp head parallel to the surface) or as an overhead light from above (lamp head perpendicular), as required — without changing hand position.

In underbody vehicle use, this means: you can hold the hand lamp with one hand and align the lamp head to optimally hit the desired surface — even if your hand isn't pointing in the right direction. For inspections under the vehicle, where freedom of movement is restricted, this is a real gain in comfort. Fixed swivel-head lamps require repositioning the entire hand, which is often not possible in confined spaces.

The integrated metal bracket is made of sturdy steel and reliably supports the weight of the lamp including the battery. As a hanging device on workshop hooks, vehicle eyelets, or temporary fasteners, it makes the WL 300 a hands-free positionable lamp. Hung on the hood in the engine bay, it illuminates the engine bay without any manual effort — useful for tasks requiring both hands. The bracket can also be used as a carrying handle if you don't want to hold the lamp in your hand — for example, when transporting it between different work areas on the vehicle.

In combination with the included belt clip, this results in a complete carrying solution for mobile operations: on the belt for quick access, or hung on the vehicle when both hands are needed for work. This is the kind of everyday practicality that you only appreciate once you have it.

Construction and Technical Details of the WL 300 18.0 — Dimensions, Weight, and Ergonomics

The FLEX WL 300 18.0 LED Cordless Hand Lamp, with dimensions of 125 × 75 × 205mm (without battery), is compact and handy. The weight of 0.4 kg without battery is in the typical range for an 18V cordless hand lamp — with a 2.5 Ah battery, the total weight is around 600g, which remains comfortable for one-handed work over longer periods.

The grip design is ergonomically designed for one-handed operation. The soft-grip handle provides a secure hold even with damp hands or work gloves — in everyday detailing, where you regularly come into contact with polishes, water, and cleaners, this is a relevant safety feature. The controls for brightness levels and on/off are accessible without changing hand position.

The housing is designed for daily workshop use: bumps, scratches, and occasional drops onto the workshop floor are easily withstood. This is often not the case with inexpensive consumer hand lamps — thin-walled plastic housings and fragile swivel joints are common weaknesses there. The WL 300 18.0 is a tool, not a consumer gadget.

Two brightness levels are sufficient for everyday use: 150 lumens for continuous operation with longer battery life, 300 lumens for intensive inspection phases or poorly lit areas. There is no dimming function or color temperature adjustment — the WL 300 18.0 is not a control tool for paint inspection at CRI level, but a robust work light for practical tasks. If you need CRI 97+ for detailed inspection, you should opt for the MWL 150 4 or the DWL 2500.

WL 300 18.0 in Comparison — Hand Lamp vs. Headlamp and Full-Spectrum Light

The WL 300 18.0 clearly positions itself between the multi-purpose headlamp MWL 150 4 and the large DWL 2500 full-spectrum light. Each light has its place in the detailing workflow — not as competition, but as a complement.

The MWL 150 4 (150 lumens, 54g, mountable on PXE 80) is the choice for direct polishing and short inspections where minimal weight and machine compatibility are crucial. The WL 300 18.0 (300 lumens, 400g, 18V battery) provides more light for larger work areas and can be mounted hands-free with its metal bracket. The DWL 2500 (3,000 lumens, CRI 96, tripod-mountable) is the professional instrument for full inspection and paint control.

For a complete toolkit, we recommend all three: MWL 150 4 for the PXE 80 and precise small work, WL 300 18.0 for engine bay, wheel arch, and medium lighting tasks, DWL 2500 for overall inspection and professional paint control. This is not a luxury — it is the right lighting solution for every stage of vehicle preparation.

Buy FLEX WL 300 18.0 — the Cordless Hand Lamp for the FLEX 18V Detailing System

The FLEX WL 300 18.0 LED Cordless Hand Lamp is the right addition for all FLEX 18V users looking for a compact, mobile hand lamp for workshop and vehicle work. The affordable entry price makes it an investment without great risk — those already in the FLEX 18V system immediately have the necessary battery and can use the WL 300 directly.

Especially for mobile detailers who work at the customer's site, the WL 300 18.0 is a practical all-rounder: light enough for the toolbox, strong enough for all typical vehicle inspection tasks, and always within reach thanks to the belt clip. For beginners in the FLEX 18V system, it is also an affordable entry point to experience the benefits of the cordless battery system.

Anyone buying the WL 300 18.0 as their first FLEX 18V device should also plan for an AP 18V battery pack and a charger. Those who already own FLEX 18V devices buy the WL 300 as a standalone unit without a battery — existing batteries will work immediately.