{"product_id":"flex-vc2lmchip180ec-akku-huftsauger-18v","title":"\"VC 2 L MC Hip 18.0-EC\" Cordless Hip Vacuum (18V)","description":"\u003ch2\u003eCordless Hip Vacuum for Hands-Free Operation — FLEX VC 2 L MC Hip 18.0-EC for Detailing and Mobile Vehicle Cleaning\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat is the FLEX VC 2 L MC Hip 18.0-EC? The FLEX VC 2 L MC Hip 18.0-EC is a cordless 18V hip vacuum cleaner with a hip belt — a 2-kg compact vacuum worn on the body, enabling hands-free work when vacuuming vehicles, upholstery, and detailing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eBoth hands for work, the vacuum on your body — that's the concept of the \u003cstrong\u003eFLEX VC 2 L MC Hip 18.0-EC Cordless Hip Vacuum\u003c\/strong\u003e. While conventional vacuum cleaners stand on the floor and require one hand to guide the nozzle, the user wears the VC 2 L MC Hip on a hip belt: 2 kg total weight without battery, compact dimensions of 340 × 135 × 290 mm, and a 2.5-meter suction hose extension that follows flexibly like an arm during work. The result is suction capacity anywhere on the vehicle, without having to carry, reposition, or put down the vacuum.\u003c\/p\u003e\n\u003cp\u003eIn professional detailing, the hip-worn principle enables a method of working that is not possible with a stationary device: simultaneous vacuuming and brushing during upholstery cleaning, hands-free guiding of a polishing machine while dust is simultaneously extracted, or thorough vacuuming of narrow areas such as door panels and center consoles, where both hands are needed for pressure and nozzle guidance. The VC 2 L MC Hip is the tool that fundamentally changes the ergonomics of vehicle interior cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe combination of the FLEX VC 2 L MC Hip and a stationary workshop vacuum is the professional two-vacuum concept for detailing workshops: the VCE 33 L MC for intensive main cleaning and wet extraction, and the Hip model for hands-free, mobile initial intake and fine cleaning in hard-to-reach vehicle areas. This division is more efficient than trying to solve all tasks with a single device. Professional workshops with multiple employees can use both devices in parallel, significantly reducing the total cleaning time per vehicle. The VC 2 L MC Hip is particularly suitable for use by a second person who can specifically work on detailed areas in parallel with the main cleaner.\u003c\/p\u003eThe device is available without battery and charger and runs on all \u003ca href=\"\/en\/products\/flex-pset55r-akku-set-18v\"\u003eFLEX 18V battery packs\u003c\/a\u003e — the same pack used for polishers, heat guns, and LED work lights. The platform consistency of the FLEX 18V system makes the VC 2 L MC Hip an economical extension to an existing FLEX tool park.\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHip belt for hands-free work — both hands for brush, nozzle, and tool.\u003c\/strong\u003e The hip belt of the VC 2 L MC Hip is the decisive unique selling point: the vacuum sits stably on the hip, follows the user's movements, and leaves both hands free for the actual work. This enables effective two-handed work when vacuuming — one hand with the suction nozzle, the other with a brush or applicator sponge — and significantly reduces cleaning time for upholstery and carpet work. In vehicle preparation, this working style is particularly valuable in confined areas such as door pockets, rear seat crevices, and trunk edge areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kg body weight and brushless motor — long-term suitable for professional wearing comfort.\u003c\/strong\u003e With an unladen weight of 2 kg (without battery), the VC 2 L MC Hip is optimized for wearing comfort: the total weight with a 2.5 Ah battery pack remains under 3 kg — a manageable weight for a workday on the hip belt. The brushless EC motor reduces heat generation during operation and significantly increases the service life of the drive compared to conventional brushed motors. For continuous use in a detailing workshop, this is the right motor technology.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco mode up to 45 minutes runtime — sufficient capacity for complete vehicle interior cleaning.\u003c\/strong\u003e In Eco mode, the VC 2 L MC Hip achieves a runtime of up to 45 minutes with a suitable battery pack — enough for a complete interior cleaning of a car. Boost mode offers maximum suction power with shorter runtime (approx. 22 minutes) for stubborn dirt. The manual MC filter cleaning system ensures that the suction power remains constant throughout use — quick filter cleaning by air blast, then continue working.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\n\u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Use the VC 2 L MC Hip for initial inspection and preliminary vacuuming: put on the belt, guide it through the interior with the left hand, and at the same time use the right hand to push the narrow telescopic extension into all crevices and corners — door pockets, seat belt pockets, under seats, ashtrays. This two-handed method is not possible with a stationary vacuum cleaner. Empty the 1.5-liter tank after every second vehicle — for compact cars, it's enough for the entire interior; for larger vehicles and heavy soiling, check it periodically.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eHip Vacuum Concept in Detailing — How Wearing It Changes the Workflow\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX VC 2 L MC Hip\u003c\/strong\u003e concept — vacuum on the hip belt, both hands free — is not a gimmick but an ergonomic answer to a real challenge in vehicle interior cleaning. Who hasn't experienced it: the stationary vacuum stands at the vehicle entrance, the suction hose length just reaches the rear footwell, and for the trunk, the vacuum has to be moved. With each change of position, you lose time and concentration.\u003c\/p\u003e\n\u003cp\u003eWith the VC 2 L MC Hip, the vacuum follows the user. You walk around the vehicle, open the rear door, vacuum the rear seat area and the trunk, open the front door, vacuum the driver and passenger areas — without physically moving the vacuum once. This noticeably reduces the pure travel time and repositioning during a complete vehicle interior cleaning.\u003c\/p\u003e\n\u003cp\u003eFree hands enable a more effective and thorough working method: while one hand guides the suction nozzle into tight areas, the other can simultaneously press upholstery, pull open folds, or use a brush. For cleaning velour seats, for example: one hand with the upholstery nozzle, the other with a soft brush that raises the velour so that the suction nozzle can penetrate deeper. This simultaneous working method is not possible with a one-handed conventional vacuum.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe 2.5-meter suction hose can be reduced to a compact length of 0.5 meters — ideal for use in very confined areas, extended to full length for greater reach. This flexibility in hose length is more important for a hip vacuum than for a stationary device: since the user moves, the hose length should be precisely adapted to the respective situation. A hose that is too long will drag uncontrolled through the interior when the user moves; a hose that is too short limits the reach. The telescopic function solves this problem practically.\u003c\/p\u003eThe 1.5-liter tank volume of the VC 2 L MC Hip is dimensioned correctly for this application: small enough for the low total weight, large enough for complete interior cleaning of a compact vehicle. The 2.5-meter suction hose extension can be compressed to 0.5 meters — for tight areas without annoying excess hose length.\n\u003ch3\u003eFLEX 18V Platform — the VC 2 L MC Hip in the Cordless Tool Ecosystem\u003c\/h3\u003e\n\u003cp\u003eAs part of the \u003cstrong\u003eFLEX 18V System\u003c\/strong\u003e, the VC 2 L MC Hip shares the battery platform with the entire FLEX 18V tool range. Anyone who already owns \u003ca href=\"\/en\/products\/flex-pset55r-akku-set-18v\"\u003eFLEX P-Set 55 R battery packs\u003c\/a\u003e for their eccentric polisher can use them directly in the VC 2 L MC Hip — no separate battery packs, no separate charger. This is the practical system logic for which FLEX developed the 18V system.\u003c\/p\u003e\n\u003cp\u003eThe runtimes of the VC 2 L MC Hip vary depending on battery capacity and operating mode: In Eco mode (reduced suction power), long operating times are possible with a 5.0 Ah pack, shorter with a 2.5 Ah pack. For typical use in vehicle interior cleaning, Eco mode is sufficient in most cases. Boost mode is used for heavily soiled areas, dried-on dirt, and stubborn pet hair.\u003c\/p\u003e\n\u003cp\u003eThe circuit board layout of the VC 2 L MC Hip supports all FLEX 18V battery packs with 2.5 \/ 5.0 \/ 8.0 Ah. The heavy 8.8 Ah XLITHIUM pack from the \u003ca href=\"\/en\/products\/flex-pset1888r-akku-set-xlithium-18v\"\u003eP-Set 18-88 R\u003c\/a\u003e fits mechanically, but is oversized for wearing comfort on the hip belt — the additional weight of over 900g is noticeably heavy on the hip belt. The optimal balance of runtime and wearing comfort is achieved with the 5.0 Ah pack: sufficient capacity for several vehicles in alternating operation, comfortable total weight while wearing.\n\u003c\/p\u003e\u003cp\u003eOne aspect that is underestimated in everyday life: thanks to its brushless EC motor, the VC 2 L MC Hip has significantly lower noise development than comparable vacuum cleaners with conventional brushed motors. During interior cleaning of vehicles, the operator is in or directly next to the vehicle — a quiet vacuum is relevant for concentration and the professional impression on the customer. The EC motor operates more quietly and releases less heat, which is particularly pleasant when worn on the hip: the dissipated heat does not end up directly on the user's body as with a heat-generating brushed motor.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application for the VC 2 L MC Hip — When the Hip Model is the Right Choice\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX VC 2 L MC Hip\u003c\/strong\u003e is not optimal for all vacuuming tasks — it is particularly strong for specific uses. The most important thing: It is not a substitute for a powerful stationary vacuum cleaner like the \u003ca href=\"\/en\/products\/flex-vce33lmc-sicherheitssauger-30l\"\u003eVCE 33 L MC\u003c\/a\u003e, but an addition for specific tasks.\u003c\/p\u003e\n\u003cp\u003eThe VC 2 L MC Hip is ideal for: complete vehicle interior cleaning where hands-free operation and mobility are important, detailing initial inspections and quick intermediate vacuuming rounds, mobile use at the customer's site without a power outlet and vacuum infrastructure, working in confined spaces and hard-to-reach vehicle areas, and pre-cleaning before wet cleaning of upholstery and carpets. For these tasks, the hip belt is a real advantage.\u003c\/p\u003e\n\n\u003cp\u003eAnother advantage of the hip concept is evident in mobile operations at the customer's site: no setup of a stationary vacuum, no lugging heavy equipment, no searching for a power outlet — the VC 2 L MC Hip is ready for use as soon as the hip belt is put on and the battery is inserted. For mobile detailers who drive to the customer with their vehicle and provide professional interior cleaning with limited equipment, this format is a real competitive advantage. The device fits into a small carrying case or bag and takes up minimal space in the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe manual MC filter cleaning of the VC 2 L MC Hip is practical: a short air blast impulse dislodges deposited dust from the filter element and transfers it to the 1.5-liter tank. This process takes a few seconds and can be carried out between two vehicles or when suction power noticeably decreases. The filter element with 1250 cm² surface area is proportionally dimensioned for the 1.5-liter tank and enables high dust absorption in relation to the tank size.\u003c\/p\u003e\n\u003cp\u003eThe VC 2 L MC Hip is less suitable for: large-volume wet extraction (1.5L tank too small), dust-intensive workshop tasks (Class L with small filter area), and daily main vacuum operation in a high-throughput workshop with many vehicles. Here, a stationary VCE vacuum works more efficiently.\u003c\/p\u003e\n\u003ch3\u003eComparison VC 2 L MC Hip vs. VC 6 L MC 18.0 — Hip Vacuum or Compact Vacuum\u003c\/h3\u003e\n\u003cp\u003eIn direct \u003cstrong\u003ecomparison\u003c\/strong\u003e with the \u003ca href=\"\/en\/products\/flex-vc6lmc18-akku-kompaktsauger-18v\"\u003eFLEX VC 6 L MC 18.0 Cordless Compact Vacuum\u003c\/a\u003e, the VC 2 L MC Hip shows its specific strength: The device is smaller, lighter, and portable — the VC 6 L MC 18.0 stands on the floor, has more tank volume (6L vs. 1.5L) and more suction power (1400 l\/min vs. 1200 l\/min).\u003c\/p\u003e\n\u003cp\u003eThe decision is clear: those who need hands-free vacuuming and need to be mobile in confined vehicle areas choose the VC 2 L MC Hip. Those who need more tank volume and suction power for more thorough main cleaning and do not want a hip belt choose the VC 6 L MC 18.0. Many professional detailers use both devices: the Hip for initial inspections and mobile intermediate use, the VC 6 L MC 18.0 for intensive main cleaning with high suction volume.\u003c\/p\u003e\n\u003ch3\u003eBuy FLEX VC 2 L MC Hip 18.0-EC — the Cordless Hip Vacuum for Ergonomic Detailing\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX VC 2 L MC Hip 18.0-EC\u003c\/strong\u003e is the right vacuum for professional detailers who want to make their interior cleaning work more efficient and ergonomic. The hip-wearing principle, the brushless EC motor, and FLEX 18V platform compatibility make it an intelligent addition to any FLEX-equipped detailing workstation.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe combination of the FLEX VC 2 L MC Hip and a stationary workshop vacuum is the professional two-vacuum concept for detailing workshops: the VCE 33 L MC for intensive main cleaning and wet extraction, and the Hip model for hands-free, mobile initial intake and fine cleaning in hard-to-reach vehicle areas. This division is more efficient than trying to solve all tasks with a single device. Professional workshops with multiple employees can use both devices in parallel, significantly reducing the total cleaning time per vehicle. The VC 2 L MC Hip is particularly suitable for use by a second person who can specifically work on detailed areas in parallel with the main cleaner.\u003c\/p\u003eThe device is available without battery and charger (SKU D1-FLEX-509981) — for FLEX 18V owners, it's an immediate expansion of their cordless tool park. Those new to the FLEX system can combine the VC 2 L MC Hip with the \u003ca href=\"\/en\/products\/flex-pset55r-akku-set-18v\"\u003eP-Set 55 R\u003c\/a\u003e for immediate use. The investment pays off for detailers who clean many vehicles daily and want to leverage every time advantage in interior cleaning.\n","brand":"FLEX","offers":[{"title":"VC 2 L MC Hip 18.0-EC \"509981\" (Battery\/charger not included) \/ 2L","offer_id":57377626325327,"sku":"D1-FLEX-509981","price":216.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/flex-vc-2-l-mc-hip-18-0-ec-akku-hueftsauger-18v-vc-2-l-mc-hip-18-0-ec-509981-2-l-509981.png?v=1775059254","url":"https:\/\/detailing1.at\/en\/products\/flex-vc2lmchip180ec-akku-huftsauger-18v","provider":"Detailing1","version":"1.0","type":"link"}