{"title":"Top Coat matt by COLOURLOCK","description":"\u003ch2 id=\"speakable-headline\"\u003eLeather remains invisibly dyed only with COLOURLOCK's Matte Top Coat\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n\n  \u003cp\u003e\u003cem\u003eWhat is COLOURLOCK's Matte Top Coat? The matte finishing lacquer of the dyeing process: it seals fresh leather dye against abrasion, perspiration, and cleaning, and scatters light instead of reflecting it. This allows the repair to match the satin-matte factory look of modern automotive and furniture leather rather than giving it away.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eCOLOURLOCK's Matte Top Coat\u003c\/strong\u003e is the final step in professional leather dyeing and the one that decisively determines the visible result. The lacquer applies a thin, elastic clear film over the dried leather dye, protecting it from abrasion, skin oils, and cleaning agents while diffusing the light. Two formulas are available: one for standard application and a reinforced version for areas subject to constant heavy wear.\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFor modern leather, matte is the factory state, not a personal preference.\u003c\/strong\u003e Car seats, steering wheels, and door panels leave the factory with a dull, light-scattering finish. Gloss only develops over years of friction and maintenance. A gloss-sealed repair spot therefore stands out like a sticker on a matte surface.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eTwo formulas for two wear categories.\u003c\/strong\u003e COLOURLOCK \"Top Coat\" (Dull) is the standard matte finish for dyeing and color refreshes, available in 250 ml and 1000 ml \/ 1 liter. COLOURLOCK \"Top Coat\" (Compact \/ Dull) is the reinforced variant for high-use areas and comes in 1000 ml \/ 1 liter.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eThe gloss level is continuous, not binary.\u003c\/strong\u003e Professional shops buy matte and glossy versions and mix them to achieve the target value. The pre-mixed automotive and furniture variant from the parent category consists of one-third glossy and two-thirds matte top coat, landing in the satin-matte range where most OEM leathers reside.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003ePro tip from Detailing1:\u003c\/strong\u003e Never judge the gloss level by the wet film. Every Top Coat, even the matte version, looks shiny when freshly applied and only flattens to its true value once dried. We regularly receive inquiries from customers who added more matte agent after the first pass because the surface looked too greasy, only to be left with a dull, chalky seat the next day. The detour saves five minutes: create a palm-sized sample area on the underside of the seat, spray your exact mixture in two thin cross-coats, dry it completely with a heat gun, and only then hold it up to the untreated door panel in daylight. Under artificial light, you won't see the difference that your passenger will immediately notice in the summer.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eModern car leather is matte from the factory, not glossy\u003c\/h3\u003e\n\u003cp\u003eThe eye registers differences in gloss faster than differences in color. A repair where the shade is slightly off is barely noticeable — one that is glossy stands out immediately.\u003c\/p\u003e\n\n\u003cp\u003eThe reason lies in the finishing, the paint-like color and protective layer on pigmented smooth leather. From the factory, this layer is filled with matting particles that scatter incoming light in many directions rather than reflecting it in a concentrated beam like a mirror. You can tell: a standard leather seat does not show a strip of light on the window frame, but rather a soft gradient.\u003c\/p\u003e\n\n\u003cp\u003eIt is precisely this scattering that is lost in everyday life. Friction from clothing polishes the matting particles smooth in contact zones, care products add a film on top, and after years, seat bolsters, entry edges, and steering wheel rims become shiny, while the rest of the interior remains matte. Anyone who dyes these areas and finishes them with a glossy lacquer doubles the error instead of fixing it.\u003c\/p\u003e\n\n\u003cp\u003eA matte finish reverses this. The film scatters the light again like it did at the factory, the repaired area visually disappears into the surroundings, and the color underneath is protected against the exact stress that would otherwise polish it shiny again. From the Detailing1 daily routine: Inquiries from people dissatisfied with the dyeing result are almost never about the color tone, but about glossy spots at the transitions.\u003c\/p\u003e\n\n\u003ch3\u003eTwo matte Top Coats for two wear categories\u003c\/h3\u003e\n\u003cp\u003eBoth products in this category provide the same finish. They differ in the density of the film they leave behind, and therefore in the surface for which they are intended.\u003c\/p\u003e\n\n\u003cp\u003eCOLOURLOCK \"Top Coat\" (Dull) is the standard case. It seals dyes and color refreshes on smooth leather and artificial leather, makes the surface water- and dirt-repellent, and creates the matte look without filling in the grain. For individual seat bolsters, a steering wheel, or a door panel, 250 ml is sufficient; for entire sets and application with a spray gun, there is 1000 ml \/ 1 liter.\u003c\/p\u003e\n\n\u003cp\u003eCOLOURLOCK \"Top Coat\" (Compact \/ Dull) is the more compact formula of the same idea. It leaves behind a denser protective film with the same application and is designed for leather that undergoes constant wear: driver's seat of a high-mileage car, steering wheel rim, furniture edges, work leather. It is offered as 1000 ml \/ 1 liter, intended for large-surface work.\u003c\/p\u003e\n\n\u003cp\u003eThe choice is therefore an \"if-then\" question, not a question of quality. If you are dyeing a surface that sees little everyday friction — back seat, door panel, furniture back — the standard Top Coat is correct. If the surface is used daily, the reinforced variant gains the durability you would otherwise have to achieve with an additional pass.\u003c\/p\u003e\n\n\u003cp\u003eBoth benefit from the crosslinker. COLOURLOCK \"Crosslinker CD\" is added to the Top Coat in small quantities and binds the binders in the drying film more tightly, like additional rebar in concrete. In other words: the surface can withstand more sweat, more cleaner, and more friction before it becomes dull. The data sheet specifies one percent for soft furniture and clothing leather and two percent for robust, heavily used automotive and furniture leather. You can find all such additives under \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-faerben-additive\"\u003eCOLOURLOCK Additives \u0026amp; Auxiliaries\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eYou don't buy satin-matte, you mix it\u003c\/h3\u003e\n\u003cp\u003eBetween matte and glossy leather, there is no switch, but a scale. Professional shops therefore work with both endpoints and set the target value themselves.\u003c\/p\u003e\n\n\u003cp\u003eThe matte Top Coat is the lower limit. From there, the path leads upwards via the glossy variant from the sister category \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-faerben-top-coat-glaenzend\"\u003eCOLOURLOCK Glossy Top Coat\u003c\/a\u003e: the more of this that goes into the mixture, the more light is reflected in a directed manner. The standard ratio for a factory-typical satin-matte is one-third glossy to two-thirds matte — exactly the mixture that COLOURLOCK also offers pre-bottled as the automotive and furniture variant.\u003c\/p\u003e\n\n\u003cp\u003eYou can move downward with the \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-faerben-mattierung\"\u003eCOLOURLOCK Matting Additive\u003c\/a\u003e. COLOURLOCK \"Duller\" introduces additional matting particles into the film, which scatter the light even more broadly. It is not only mixed into the Top Coat but also directly into the leather dye if the color build-up already appears too glossy. In practice, this means: you correct the gloss at the source instead of covering it up later.\u003c\/p\u003e\n\n\u003cp\u003eThe third axis is the hand-feel, and it is often forgotten. Leather can look perfect and still feel wrong — too slippery, too sticky, too synthetic. The \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-faerben-griff-zusaetze\"\u003eCOLOURLOCK Soft \u0026amp; Wax Slip touch additives\u003c\/a\u003e are also mixed into the Top Coat: COLOURLOCK \"Soft Slip\" reduces the coefficient of friction to create a velvety feel, while COLOURLOCK \"Wax Slip\" creates the slightly waxy, grippy feeling that many matted factory leathers have.\u003c\/p\u003e\n\n\u003cp\u003eCrucially: mix before application, not after. A cured film cannot be corrected. If you change the gloss level between two seats, mix a new batch for the second seat and then it is better to treat the first one again as well, rather than having two different shades side by side.\u003c\/p\u003e\n\n\u003ch3\u003eThe Top Coat is the last step, not the first\u003c\/h3\u003e\n\u003cp\u003eThe real work lies before the lacquer. The dyeing sequence follows a fixed order, and every skipped step will show up later in the finish.\u003c\/p\u003e\n\n\u003cp\u003eAt the beginning is degreasing: \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-reinigung-entfetter\"\u003eCOLOURLOCK Degreaser\u003c\/a\u003e removes skin oils, care product residues, and silicone films, because neither primer, dye, nor lacquer will bind to a grease film. This is followed by adhesion promoter and, where old discolorations are in the leather, the barrier layer. Cracks and open areas are filled, then the color build-up follows with \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-faerben-lederfarben\"\u003eCOLOURLOCK Leather Dyes\u003c\/a\u003e in several thin passes instead of one thick one. The complete sequence is under \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-faerben\"\u003eCOLOURLOCK Dyeing \u0026amp; Finish\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eOnly when the dye has dried through does the Top Coat come in. The clean way is the spray gun using the cross-spray method: one pass lengthwise, the next across, both very thin, dried in between with a heat gun. Two to three such passes are more uniform than one thick one and are more forgiving at the transitions. For small areas — armrest, steering wheel spoke, individual bolster — application with a fine-pored sponge also works, using calm, overlapping strokes without circular motions.\u003c\/p\u003e\n\n\u003cp\u003eTwo frame conditions are decisive. The crosslinker is reactive and must not come into contact with water before processing, so only mix when the surface is ready for lacquering. And perforated leather needs attention: if the lacquer runs into the rows of holes and dries there into plugs, the seat ventilation will be noticeably weaker afterward.\u003c\/p\u003e\n\n\u003cp\u003eWe regularly receive questions about exactly this. Spraying thinner and poking through each row of holes in the wet film once solves it. Subsequent drilling rips the film around each hole open again.\u003c\/p\u003e\n\n\u003cp\u003eAs for the time required, honestly calculated: a steering wheel is sealed including drying in a good half hour, a single seat takes about an hour, a complete set an afternoon. The first time, it feels long because there is more waiting time between passes than actual working time. From the second seat, the process becomes routine, and the effort is cut in half.\u003c\/p\u003e\n\n\u003ch3\u003eWhere the matte Top Coat reaches its limits\u003c\/h3\u003e\n\u003cp\u003eThe lacquer is a specialist for pigmented smooth leather and smooth artificial leather. Outside of this substrate, it works against you, and you should know three limits before purchasing.\u003c\/p\u003e\n\n\u003cp\u003eThe first is the material. Open-pored aniline leather, nubuck, and suede have no closed finish and rely on light and air entering the fiber. A film-forming lacquer seals exactly that: the surface becomes darker, harder, and loses its velvety touch, and this cannot be undone. For these leathers, the Top Coat is simply the wrong product.\u003c\/p\u003e\n\n\u003cp\u003eThe second limit is safety-relevant and non-negotiable. The side airbag's tear seam runs through the flanks of modern car seats, and this seam must open in a controlled manner upon deployment. Dye and lacquer layers must neither stiffen nor glue it shut. If your damage is on or directly at this seam, it is not a case for chemistry in a bottle, but for an upholsterer or a leather restorer who can professionally open and resew the seam.\u003c\/p\u003e\n\n\u003cp\u003eThe third limit is what we see most often, and it is a real negative: application that is too thick. We regularly receive photos of seat surfaces on which the Top Coat was applied in one thick pass instead of two thin ones. The result feels board-like after a few weeks, the grain looks clogged, and the rigid film cracks into a fine net at the crease lines. The matte look comes from scattering, not from layer thickness.\u003c\/p\u003e\n\n\u003cp\u003eAnd an honest classification of the rest: the Top Coat is not a care product. It protects the dye. Maintenance remains a separate step and only comes into play once the film has completely cured. It also does not repair cracks and does not cover color errors. The most demanding part of a dye job remains the color match in an aged environment, not the chemistry above it — a completely dyed seat surface is therefore almost always easier than a palm-sized spot that needs to be invisibly blended.\u003c\/p\u003e\n\n\u003ch3\u003eWhich matte Top Coat belongs in your shopping cart\u003c\/h3\u003e\n\u003cp\u003eThe decision depends on two questions: how heavily is the surface used, and how large is it.\u003c\/p\u003e\n\n\u003cp\u003eIf you are dyeing a manageable surface that sees little everyday friction, take COLOURLOCK \"Top Coat\" (Dull) in 250 ml. This covers a steering wheel, armrest, individual seat bolster, or door panel without an opened bottle aging on the shelf. If an entire set is pending or you are working with a spray gun, the same product as 1000 ml \/ 1 liter is the right size, because consumption per surface is higher when spraying.\u003c\/p\u003e\n\n\u003cp\u003eIf, on the other hand, the surface is in constant use — driver's seat in a high-mileage car, steering wheel rim, furniture edge, work leather — you gain durability with COLOURLOCK \"Top Coat\" (Compact \/ Dull) in 1000 ml \/ 1 liter. If you want to adjust the gloss level exactly to an OEM leather, plan for an additional bottle of \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-faerben-top-coat-glaenzend\"\u003eCOLOURLOCK Glossy Top Coat\u003c\/a\u003e or the matting additive to move downwards. All gloss levels side-by-side are one level higher under \u003ca href=\"\/en\/collections\/koch-chemie-colourlock-faerben-top-coat\"\u003eCOLOURLOCK Top Coat \u0026amp; Finish\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eAnd the point that sets the sequence for purchasing: an overly matte build-up can be saved — you apply a pass with a higher gloss content over it and raise the value. An overly glossy cured film cannot be brought down; it must be sanded down and rebuilt, with everything that precedes it. That is why the matte bottle is what you start with, and gloss is what you add in a controlled manner.\u003c\/p\u003e\n","products":[{"product_id":"koch-chemie-colourlock-top-coat-compact-dull-matter-abschlusslack","title":"COLOURLOCK \"Top Coat\" (Compact \/ Dull) Matte Finish Coat for Professional Leather Repair","description":"\u003ch2\u003eCOLOURLOCK Top Coat (Compact \/ Dull) — matte finish coat for professional leather repairs\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does COLOURLOCK Top Coat Compact Dull do? — The matte finish coat gives colour-repaired leather lasting protection, creates a naturally matte OEM finish and clearly improves resistance to abrasion, sweat and cleaning.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Top Coat (Compact \/ Dull)\u003c\/strong\u003e is the highly concentrated, matte finish coat for leather repairs, colour refreshes and detailed finishing work. The Compact version delivers maximum protection from a thin application and gives you a tough, authentically matte finish. Perfect for modern automotive leather, high-end furniture and interior surfaces where a natural, matte OEM look is what counts. The coat locks in the colour, protects against abrasion, sweat and everyday wear, and seals the repair for the long haul.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNaturally matte OEM finish\u003c\/strong\u003e – For modern automotive leather, furniture surfaces and any job where you want zero gloss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentrated protective coat\u003c\/strong\u003e – Very high abrasion and chemical resistance while using very little product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect repair seal\u003c\/strong\u003e – Locks the colour down solid and gets you durable, professional results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eMatte protective-film technology \u0026amp; how it works\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTop Coat Compact Dull\u003c\/strong\u003e lays down a tough, flexible matte film that reliably shields the colour layer from mechanical stress and the elements. Modern leather – especially in cars – needs an even, matte way of catching light so repairs stay invisible. The Dull film breaks up light in a controlled way without hiding the grain or leaving greasy-looking patches. Thanks to its compact formula it works in really efficiently, while the leather surface keeps all of its flex. Mix in Crosslinker CD and durability climbs even higher, particularly on steering wheels and hard-worked seat bolsters.\u003c\/p\u003e\n\u003ch3\u003ePrep, application \u0026amp; professional handling\u003c\/h3\u003e\n\u003cp\u003eBefore you start, the leather has to be clean, dry and free of grease. You lay the \u003cstrong\u003eTop Coat Compact Dull\u003c\/strong\u003e down thin and even with a sponge, airbrush or spray gun. Several fine coats improve evenness and protection. The matte formula makes the finish really forgiving and ideal for hiding transitions and blending repairs in visually. If needed, add Duller to fine-tune the sheen or Soft Slip for a softer feel. Once it's fully dry the leather is ready to take everyday use again.\u003c\/p\u003e\n\u003ch3\u003eResults, use cases \u0026amp; how it differs from other Top Coat versions\u003c\/h3\u003e\n\u003cp\u003eAfter the job you get a hard-wearing, naturally matte finish that protects colour repairs and makes them look uniform. \u003cstrong\u003eCompact \/ Dull\u003c\/strong\u003e is ideal for automotive leather, matte furniture surfaces, bags and work leather. The Compact version differs from standard top coats through its higher concentration, stronger protection and more efficient use. Compared with glossier versions, Dull gives you a factory-correct, understated finish, exactly what modern leather calls for.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about COLOURLOCK Top Coat (Compact \/ Dull)\u003c\/h2\u003e\n\u003ch4\u003eWhat is the Dull version especially good for?\u003c\/h4\u003e\n\u003cp\u003eFor matte OEM finishes on vehicle and furniture leather where you don't want any gloss.\u003c\/p\u003e\n\u003ch4\u003eIs the Compact Dull more durable than regular top coats?\u003c\/h4\u003e\n\u003cp\u003eYes. The compact formula offers higher abrasion and sweat resistance.\u003c\/p\u003e\n\u003ch4\u003eCan I add Crosslinker CD?\u003c\/h4\u003e\n\u003cp\u003eYes. On heavily used leather areas it pushes durability up even further.\u003c\/p\u003e\n\u003ch4\u003eWhat's the best way to apply the coat?\u003c\/h4\u003e\n\u003cp\u003eThin, in one to two coats by sponge or spray, depending on the finish you want.\u003c\/p\u003e\n\u003ch4\u003eIs the Top Coat also suitable for synthetic leather?\u003c\/h4\u003e\n\u003cp\u003eYes, as long as it's pigmented, smooth PU\/synthetic leather.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 03\/12\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56547127165263,"sku":"D1-KCX-541-1L-01","price":52.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/541-1L-01_1.png?v=1778250895"},{"product_id":"koch-chemie-colourlock-top-coat-dull-matter-abschlusslack","title":"COLOURLOCK \"Top Coat\" (Dull) Matte Sealing Lacquer for Professional Leather Repair","description":"\u003ch2\u003eCOLOURLOCK Top Coat (Dull) — matte sealing lacquer for an original leather look\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat is COLOURLOCK Top Coat Dull used for? — The matte sealing lacquer seals repaired or recoloured leather, protects the surface against abrasion and gives you an even, original matte look with no shine.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Top Coat (Dull)\u003c\/strong\u003e is a matte sealing lacquer for the professional finishing of leather surfaces after repair or recolouring work. It reliably protects the colour layer against abrasion, friction, skin oils and everyday wear, and at the same time builds an even, natural matte look. On modern automotive leather, furniture and interior parts in particular, a matte finish is what keeps the original appearance intact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal matte look\u003c\/strong\u003e – No unwanted shine, an even finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects colour \u0026amp; repairs\u003c\/strong\u003e – Cuts down abrasion and premature wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional sealing\u003c\/strong\u003e – For long-lasting, hard-wearing leather surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSealing-lacquer technology \u0026amp; how it works\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTop Coat (Dull)\u003c\/strong\u003e forms a fine, flexible protective film over the leather colour or the repair build-up. The matte formula scatters light on purpose, which kills the shine and gives you an authentic, factory look. The surface stays flexible too, so it moves with the leather instead of fighting it. The lacquer reliably protects against mechanical stress without leaving the leather feeling hard or artificial.\u003c\/p\u003e\n\u003ch3\u003eApplication, layering \u0026amp; best practices\u003c\/h3\u003e\n\u003cp\u003eOnce the leather colour or repair build-up has dried fully, you lay down \u003cstrong\u003eCOLOURLOCK Top Coat (Dull)\u003c\/strong\u003e thin and even. Best applied by spray or with a fine-pored sponge in several light coats. Give it enough flash-off time between coats. For high-wear areas you can mix the top coat with a crosslinker (e.g. IC2) to push durability even further.\u003c\/p\u003e\n\u003ch3\u003eResults, where it fits \u0026amp; where it doesn't\u003c\/h3\u003e\n\u003cp\u003eOnce cured, the leather surface is matte, even and noticeably tougher. \u003cstrong\u003eTop Coat (Dull)\u003c\/strong\u003e works on car seats, steering wheels, door panels, furniture, bags and other pigmented smooth-leather surfaces. It's not a care product — it's a functional sealing lacquer for repair and recolouring work. Next to glossy or high-gloss versions, it gives you a subtle, original finish with no reflections.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about COLOURLOCK Top Coat (Dull)\u003c\/h2\u003e\n\u003ch4\u003eWhen do I use the matte top coat?\u003c\/h4\u003e\n\u003cp\u003eAny time you want an original, non-glossy leather finish.\u003c\/p\u003e\n\u003ch4\u003eCan I adjust the level of shine?\u003c\/h4\u003e\n\u003cp\u003eYes, by mixing it with Duller or other top-coat versions.\u003c\/p\u003e\n\u003ch4\u003eIs Top Coat Dull abrasion-resistant?\u003c\/h4\u003e\n\u003cp\u003eYes, especially combined with a crosslinker like Crosslinker IC2.\u003c\/p\u003e\n\u003ch4\u003eWhich leather types is it for?\u003c\/h4\u003e\n\u003cp\u003eFor pigmented smooth leather and many faux-leather surfaces.\u003c\/p\u003e\n\u003ch4\u003eDoes the top coat replace conditioning?\u003c\/h4\u003e\n\u003cp\u003eNo, it seals. Conditioning is done separately once it has cured fully.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 12\/12\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56616780431695,"sku":"D1-KCX-595-1L-01","price":41.99,"currency_code":"EUR","in_stock":true},{"title":"250ml","offer_id":56616780464463,"sku":"D1-KCX-595-250ML-01","price":18.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/595-1L-01_1.png?v=1765660874"}],"url":"https:\/\/detailing1.at\/en\/collections\/koch-chemie-colourlock-faerben-top-coat-matt.oembed","provider":"Detailing1","version":"1.0","type":"link"}