{"title":"Q²M Polishing by GYEON","description":"\u003ch2\u003eProfessional Paint Polishing and Defect Correction with GYEON Q²M Polishing\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Polishing? The Q²M Polishing line includes professional paint polishes, eccentric pads, and rotary pads for mechanical defect correction and paint preparation – developed as a direct preparation step before ceramic coating with GYEON Q² Coatings.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eGYEON Q²M Polishing\u003c\/strong\u003e line fills a crucial gap in the overall GYEON system: paint correction and preparation before coating. A ceramic coating preserves the condition of the paint – it does not improve it. Therefore, anyone who coats a vehicle with holograms, fine scratches, or oxidation will seal these defects under the coating. GYEON has therefore developed polishes and pads with the Q²M Polishing line that are tailored to the requirements of a professional coating workflow: effective defect correction, minimal residue, and maximum transparency for the clear coat. This makes this line an indispensable first step before every high-quality Q² coating application.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTailored to the Coating Workflow.\u003c\/strong\u003e Q²M polishes leave minimal residue and are optimized for use before GYEON Q² Coatings. No oily carriers that affect the adhesion of the coating – clean, defined results after polishing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor Dual Action and Rotary Machines.\u003c\/strong\u003e The pad assortment includes both dual action pads and rotary pads in various cut grades – from strong cutting for more severe defect correction to fine finishing for hologram-free polishing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle and Multi-Step Polishes.\u003c\/strong\u003e GYEON offers both all-in-one polishes for simpler surfaces and specialized multi-stage systems for demanding paint conditions with deep scratches or heavy oxidation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e Always test each polish first on an inconspicuous area before treating an entire surface. The cut grade of a polish and its behavior on your specific paint may vary – depending on clear coat thickness, paint hardness, and machine setting. Always start with the milder cut grade and work your way up if necessary, instead of immediately starting with the most aggressive cutting compound.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePaint Polishes and Correction Polishes: Cut Grades, Products, and Applications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe Q²M paint polishes\u003c\/strong\u003e are available in various cut grades, designed for different defect levels and paint hardnesses. The Q²M One is an all-in-one compound polish suitable for simple defects and as a single-step solution – practical for vehicles that only need a light refresh and not deep defect correction. For more severe defects such as deep holograms, wash marks, or oxidation, GYEON offers more specialized polishes with a higher cut grade, which are used on dual-action or rotary machines in a two-step process (cut → finish). The decisive advantage of all Q²M polishes: They are designed for minimal residue after polishing. This reduces the cleaning effort before coating application and ensures that no haziness is trapped under the coating.\u003c\/p\u003e\n\n\u003ch3\u003eDual Action Pads and Rotary Pads: Selection and Correct Pad-Polish Combination\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePad selection\u003c\/strong\u003e is just as crucial in the polishing process as the choice of polish. GYEON offers \u003ca href=\"\/en\/collections\/gyeon-q2m-polishing-exzenter-pads\"\u003eDual Action Pads\u003c\/a\u003e for DA polishers and \u003ca href=\"\/en\/collections\/gyeon-q2m-polishing-rotary-pads\"\u003eRotary Pads\u003c\/a\u003e for rotary polishers. The dual action pads are suitable for beginners and ambitious home users who want to work with a lower risk of error – the eccentric motion of the machine makes hologram-free polishing easier. Rotary pads for rotary machines allow for more aggressive cut grades and faster defect correction – but require more experience, as the risk of error is higher. The pads are available in cutting, medium, and finishing variants and should always be combined with the appropriate cut grade of the polish: hard cutting pad with strong compound, soft finishing pad with fine finish polish.\u003c\/p\u003e\n\n\u003ch3\u003eApplication Workflow: Paint Correction before Ceramic Coating with Q²M Polishing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe correct polishing workflow\u003c\/strong\u003e before a GYEON Q² Coating begins with a thorough pre-wash and decontamination of the vehicle. After drying, the paint thickness is measured – a paint thickness gauge is indispensable for professional work. Then, defect correction follows in two steps: First, the defect level is reduced with a stronger pad-polish combination, then polished to a hologram-free finish with a finer system. After polishing, the surface must be freed from polishing oils, residues, and silicone traces with an IPA wipe – only then is the paint ready for the Q² coating application. Skipping this step risks poor coating adhesion and uneven cross-linking.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Polishing in Comparison: GYEON vs. Other Polishing Systems for Professional Detailers\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompared to other professional polishing systems\u003c\/strong\u003e such as Koch Chemie, Rupes, or Menzerna, GYEON Q²M Polishing offers the advantage of direct system integration into the coating workflow. Polishes from other manufacturers may be technically equivalent – but they have not been tested by GYEON for compatibility with Q² coatings. For detailers specializing in GYEON coatings, this \"one-stop-shop\" principle makes troubleshooting significantly easier. GYEON's pad assortment is qualitatively on par with specialized providers like Rupes and Lake Country – but it is directly tailored to the GYEON workflow.\u003c\/p\u003e\n\n\u003ch3\u003eBuy GYEON Q²M Polishing: Complete Paint Correction System for Professional Results\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAt Detailing1\u003c\/strong\u003e, you will find the complete Q²M Polishing line – polishes, \u003ca href=\"\/en\/collections\/gyeon-q2m-polishing-exzenter-pads\"\u003edual action pads\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/gyeon-q2m-polishing-rotary-pads\"\u003erotary pads\u003c\/a\u003e, and \u003ca href=\"\/en\/collections\/gyeon-q2m-polishing-spezialpolituren\"\u003especialty polishes\u003c\/a\u003e. If you are unsure which combination is best for your paint condition and machine, read the product descriptions carefully – there you will find cut grade classifications and application recommendations. For connection to the polishing workflow, we directly recommend the \u003ca href=\"\/en\/collections\/gyeon-q2-ceramic-coatings\"\u003eQ² Ceramic Coatings\u003c\/a\u003e – the logical next step after successful defect correction.\u003c\/p\u003e","products":[{"product_id":"gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur","title":"Q²M Compound+ (Plus) (REDEFINED) Heavy Cut Polish","description":"\u003ch2\u003eKill deep scratches without compromise – GYEON Q²M Compound+\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Compound+? It's a heavy cut polish built for deep scratches, heavy swirl marks and stubborn oxidation – maximum cut for fast, effective defect correction on both hard and soft paint, with minimal follow-up work.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen a medium correction no longer cuts it, \u003cstrong\u003eGYEON Q²M Compound+\u003c\/strong\u003e steps in: the heavy cut member of the GYEON polishing line is built for the worst defects – deep wash scratches, extreme swirl marks, holograms left by bad machine work, oxidation and dull, flat paint that needs a serious correction. The REDEFINED formula gives you maximum cutting power with fast abrasive break-in, yet still leaves solid gloss once the compound step is done.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum cut for deep defect correction – even on hard paint.\u003c\/strong\u003e Q²M Compound+ removes enough clear coat to fully knock out deep scratches and stubborn defects. It really shines on hard paint (German premium cars) that just shrugs off milder compounds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast abrasive break-in – efficient for pro work.\u003c\/strong\u003e The REDEFINED formula in Q²M Compound+ fires up the abrasives quickly and hits full efficiency straight away, no long working-in. That saves you real time day-to-day and cuts the minutes per panel down noticeably.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimal residue despite the heavy cut.\u003c\/strong\u003e High-cut compounds often leave dusty residue that's a pain to dig out of gaps and corners. Q²M Compound+ is formulated so residue stays minimal and wipes off easily – a big deal when you do this for a living.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Run Q²M Compound+ on a rotary or dual-action (top speed) with a \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eheavy cut pad\u003c\/a\u003e or a \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003ewool pad\u003c\/a\u003e for maximum cut. Always work panel by panel and lay down a test spot first – leave Compound+ on too long or push the speed too high and it'll eat through soft paint fast. After Compound+, always finish with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhen is Q²M Compound+ the right call?\u003c\/h3\u003e\n\u003cp\u003eReach for Q²M Compound+ when: you can still feel the scratch with a fingernail (medium to deep scratches), the paint is heavily oxidised and dull, the paint is so hard it won't respond to Q²M Compound (Medium Cut), or you need to strip out a bad previous polish (holograms from sloppy machine work). Always confirm the choice on a test spot first – if Medium Cut does the job, you don't need Compound+. As a rule, Compound+ leaves holograms behind that a finishing polish has to clear.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Compound+ on different machine types\u003c\/h3\u003e\n\u003cp\u003eQ²M Compound+ works on both rotary and dual-action machines. On a rotary with a wool pad (\u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003eQ²M Rotary Wool Heavy Cut\u003c\/a\u003e) Compound+ pulls the highest correction power – perfect for extreme defects or really hard paint. On a dual-action with a \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eheavy cut pad\u003c\/a\u003e the correction is a touch lower but safer if you're less experienced. What comes next: Compound+ takes out the defects but leaves visible polishing holograms on glossy paint – finishing with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e is a must.\u003c\/p\u003e\n\n\u003ch3\u003eThree-step correction: Compound+ → Compound → Polish\u003c\/h3\u003e\n\u003cp\u003eFor extreme paint defects we'd run a three-step correction: step 1 with Q²M Compound+ for the heavy defect removal (holograms accepted as an unavoidable side effect), step 2 with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e (Medium Cut) for the fine correction and better gloss, step 3 with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for the final shine and full hologram removal. Even on badly beaten paint, this sequence lands a flawless, wet-look finish.\u003c\/p\u003e\n\n\u003ch3\u003eResidue and finishing after Q²M Compound+\u003c\/h3\u003e\n\u003cp\u003eOnce you've run Q²M Compound+, finishing isn't optional. Compound+ leaves holograms and fine micro-marring behind that show up on glossy paint. \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e is the finishing polish for the job – it clears the Compound+ holograms reliably and pulls out maximum depth of gloss. For milder correction jobs there's an alternative: \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e (Medium Cut) as a finishing step between Compound+ and Polish.\u003c\/p\u003e\n\n\u003ch3\u003eOur pick: Q²M Compound+ for pros and serious detailers\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Compound+ is the strongest cut in the Q²M range – a tool for serious paint correction. If you want to take out deep scratches, oxidation or old damage properly, there's no way around Compound+. For a complete polishing kit we'd grab: Q²M Compound+ with a \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003ewool pad\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e with a \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003ecut pad\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e with a \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003efinish pad\u003c\/a\u003e, and finally \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e before the coating.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57334908256591,"sku":"D1-GYEON-Q2MCOMP+1000","price":64.0,"currency_code":"EUR","in_stock":true},{"title":"4 fl. oz.","offer_id":57334904553807,"sku":"D1-GYEON-Q2MCOMP+120","price":12.0,"currency_code":"EUR","in_stock":false},{"title":"250ml","offer_id":57334908223823,"sku":"D1-GYEON-Q2MCOMP+250","price":22.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur.png?v=1774645428"},{"product_id":"gyeon-q2m-compound-medium-cut-lackpolitur","title":"Q²M Compound Medium Cut Paint Polish","description":"\u003ch2\u003eClearing medium scratches for good – GYEON Q²M Compound\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Compound? GYEON Q²M Compound is a medium-cut paint polish that cuts medium scratches, swirls and holograms out of the clear coat while already pulling up serious gloss – for a defect-free finish, either as prep for a coating or as a standalone polish.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn the three-step polishing system, \u003cstrong\u003eGYEON Q²M Compound\u003c\/strong\u003e sits in the middle: more bite than a pure finishing polish, gentler than a heavy-cut compound. Exactly right for the job you meet most often — everyday scratches, swirl patterns and holograms left behind by machine work, all sorted in one pass with a good level of gloss already on the panel. The compound is built for a machine polisher and a matching pad, and it gives you fast, repeatable results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium cut – it gets on top of swirls and everyday scratches.\u003c\/strong\u003e Q²M Compound has exactly the right bite for the most common paint defects: wash marring, fine swirl patterns and light holograms are knocked back hard or removed completely in a single pass, without taking off more clear coat than you need to.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh gloss straight out of the compound stage.\u003c\/strong\u003e Plenty of medium-cut compounds leave the paint dull and hazy, so you have to chase them with a finishing polish. Q²M Compound finishes down much better on its own: gloss after the compound stage is already high, which cuts the time you spend on the finishing pass.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow dusting – cleaner work all round.\u003c\/strong\u003e The Q²M Compound formula keeps polishing dust to a minimum – less spent product on the car and around you, cleaner work and less wiping down between polishing steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Run Q²M Compound on a \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003emedium-cut pad\u003c\/a\u003e with a dual-action machine (speed 6–8). Always start on a small test spot and match the machine setting to how bad the defects are. After the compound step, finish with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e – for that last bit of deep gloss. Before you coat, always degrease with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eMedium cut vs heavy cut: when Q²M Compound, when Compound+?\u003c\/h3\u003e\n\u003cp\u003ePicking between medium cut and heavy cut decides your result. Q²M Compound (medium cut) handles scratches down to a medium depth – everyday swirls, wash marring, light holograms and defects your fingernail just barely doesn't catch. On deep scratches, heavy holograms or really hard paint you go to \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e (heavy cut), which takes off a lot more clear coat. Rule of thumb: always start with the milder compound – if the result isn't there, step up to Compound+.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Compound in a two-step correction\u003c\/h3\u003e\n\u003cp\u003eThe standard programme in professional paint correction is the two-step polish: step 1 with Q²M Compound or \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e (defect correction), step 2 with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e (refining and deep gloss). Q²M Compound takes care of the correction step: every defect goes in this pass, the deep gloss comes in the finishing pass. Because Q²M Compound already leaves a good level of gloss, paint that isn't badly beaten up can sometimes be done one-step with the compound alone.\u003c\/p\u003e\n\n\u003ch3\u003ePad recommendation for Q²M Compound\u003c\/h3\u003e\n\u003cp\u003eFor the best results with Q²M Compound we'd reach for a \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eheavy-cut\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003ecut pad\u003c\/a\u003e on the dual-action machine, or a medium-cut pad on the rotary. The pad decides your effective cut: hard pad + medium-cut polish = more effective cut, soft pad + the same polish = less. That gives you room to dial in to the defect level. After the compound step, swap the pad for the finishing pass with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Compound on different paint hardnesses\u003c\/h3\u003e\n\u003cp\u003ePaint hardness varies from brand to brand – German cars (BMW, Mercedes, Porsche) often run harder clear coats than Japanese or Korean ones. On very hard paint you can push Q²M Compound up a machine speed. On soft paint (a lot of Fiat and Renault models, for example) go careful – too high a setting takes off more clear coat than you want. The test spot is non-negotiable here. For extreme cases on really hard paint there's \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: Q²M Compound for professional paint correction\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Compound is the first thing you grab when a car sits at a medium defect level. Paired with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e you have a complete two-step polishing system. As a full correction sequence we'd run: decontamination (\u003ca href=\"\/en\/products\/gyeon-q2m-iron-redefined-flugrostentferner\"\u003eQ²M Iron\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-tar-redefined-harzentferner-teerentferner\"\u003eQ²M Tar\u003c\/a\u003e + clay), Q²M Compound + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e, degreasing with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e and coating with \u003ca href=\"\/en\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2-one-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² One EVO\u003c\/a\u003e.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57335242555727,"sku":"D1-GYEON-Q2MCOMP1000","price":49.0,"currency_code":"EUR","in_stock":false},{"title":"4 fl. oz.","offer_id":57335238558031,"sku":"D1-GYEON-Q2MCOMP120","price":12.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-compound-medium-cut-lackpolitur.png?v=1774646585"},{"product_id":"gyeon-q2m-polish-finishing-lackpolitur","title":"Q²M Polish Finishing Paint Polish","description":"\u003ch2\u003eThe final gloss – GYEON Q²M Polish\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Polish? GYEON Q²M Polish is a finishing paint polish for the very last polishing stage – it clears the fine holograms and buffer marring left by the correction step and pulls the maximum depth of gloss out of the paint, for a hologram-free, mirror-clear finish.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eOnce you have corrected the defects with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, the paint is defect-free but not yet perfect: fine buffer marring and holograms from the correction step are still on there and they have to go. \u003cstrong\u003eGYEON Q²M Polish\u003c\/strong\u003e is built for exactly that – a finishing polish with ultra-fine abrasives that clear those last traces completely and pull the maximum depth of gloss out at the same time. The result is a surface where every detail of the paint shows up in the clearest light.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUltra-fine abrasives clear holograms and compound marring completely.\u003c\/strong\u003e Q²M Polish runs very finely graded abrasives that only take the last, finest defects from the correction step – without removing any meaningful amount of clear coat. The holograms from the compound stage are gone for good.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePulls the maximum depth of gloss out – on deep black and other dark paints too.\u003c\/strong\u003e Gloss is where Q²M Polish parts ways with a cutting polish: on dark paint you get a deep, wet-mirror shine – the optical quality that separates professional detailing from a weekend job.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHologram-free result, ready to coat straight away.\u003c\/strong\u003e After the last finishing pass, Q²M Polish leaves paint that is free of holograms – the ideal base for a ceramic coating. A coating amplifies whatever the paint is doing optically, so hologram-free paint looks dramatically better under coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Run Q²M Polish on a \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish pad\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e on the DA at a medium speed setting (5–6). After the pass, check your work under LED light or in raking light – holograms are hard to spot in direct sunlight. Only once the paint is hologram-free do you wipe down with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e and lay the coating on.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eQ²M Polish as a one-step polish on lightly marred paint\u003c\/h3\u003e\n\u003cp\u003eQ²M Polish is not just the finishing stage after a compound – you can also run it as a one-step polish on paint with light defects. If the paint only shows fine wash marks, light swirls and minimal holograms (no deep scratches), Q²M Polish clears them in a single pass and brings the gloss up right away. That saves you a polishing step and takes off less clear coat than going in with a compound. How to decide: always do a test spot and check whether Q²M Polish clears the defects completely.\u003c\/p\u003e\n\n\u003ch3\u003eThe GYEON polishing kit: Polish as the end of the sequence\u003c\/h3\u003e\n\u003cp\u003eIn the full GYEON polishing kit, Q²M Polish takes the last slot: \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e (heavy defects) → \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e (medium defects) → Q²M Polish (finishing and high gloss). Each stage sets the surface up for the next one. And Q²M Polish is not the step you skip – it is the one that turns “polished well” into “professionally finished”.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Polish for one-step detailing\u003c\/h3\u003e\n\u003cp\u003eOn cars that are in good shape, Q²M Polish is the obvious call for one-step detailing: no compound needed, no multi-stage session. One pass with Q²M Polish on a Polish pad – result: minimal correction, maximum gloss, ready for the coating. On regularly maintained cars that already wear a ceramic coating (the yearly refresh polish, no deep defects) Q²M Polish is the ideal pick: one step, barely any clear coat taken off, ready to coat immediately.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: Q²M Polish for the final gloss\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Polish is the finishing product no serious paint job can do without. Without a finishing polish the work is not finished – holograms and compound marring stay visible and get amplified under the coating. As a complete polishing package we would grab: Q²M Polish + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish pad\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e, together with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e before the coating and \u003ca href=\"\/en\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2-one-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² One EVO\u003c\/a\u003e to finish.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57335242654031,"sku":"D1-GYEON-Q2MPOL1000","price":54.0,"currency_code":"EUR","in_stock":true},{"title":"4 fl. oz.","offer_id":57335238721871,"sku":"D1-GYEON-Q2MPOL120","price":12.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-polish-finishing-lackpolitur.png?v=1774647269"},{"product_id":"gyeon-q2m-glasspolish-glaspolitur","title":"Q²M GlassPolish Glass Polish","description":"\u003ch2\u003eClear glass, deep view – GYEON Q²M GlassPolish\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M GlassPolish? GYEON Q²M GlassPolish is a dedicated glass polish that mechanically cuts stubborn water spots, oxidation and fine haze off your car’s glass – leaving a crystal-clear, optically flawless surface ready for a long-term glass coating.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen glass cleaner stops doing the job, polishing is what’s left. \u003cstrong\u003eGYEON Q²M GlassPolish\u003c\/strong\u003e carries abrasives matched to the hardness of glass, so limescale, water spots and light oxidation get cut away mechanically – without damaging the pane. What you end up with is an optically flawless, crystal-clear surface you can then seal for the long haul with \u003ca href=\"\/en\/products\/gyeon-q2-view-evo-rain-repellent-glasversiegelung\"\u003eQ² View EVO\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2-quickview-glasversiegelung\"\u003eQ² QuickView\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlass-specific abrasives pull off baked-in limescale and oxidation.\u003c\/strong\u003e Hard-water spots that have been etching into the glass for months are well past the point where any cleaner will touch them. Q²M GlassPolish uses ultra-fine abrasives that shave those deposits off mechanically, without harming the glass underneath.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrep for a proper glass coating – far better bonding.\u003c\/strong\u003e Glass sealants grip polished, residue-free glass far better than dirty or scaled panes. Q²M GlassPolish gives the coating exactly the surface it wants – and the durability you get out of it climbs noticeably.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafe on every automotive glass type, no streaking.\u003c\/strong\u003e Q²M GlassPolish works on all common automotive glass and leaves no residue or haze behind. The abrasives are tuned to glass – used properly, there’s no risk of over-polishing or putting scratches in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Best way to lay down Q²M GlassPolish is a glass polishing pad on a DA polisher – or by hand with a microfibre. It goes on dry, clean glass, and you work it in until the white polish turns clear. Wipe off with a fresh microfibre, follow up with Q²M Glass, then seal with \u003ca href=\"\/en\/products\/gyeon-q2-view-evo-rain-repellent-glasversiegelung\"\u003eQ² View EVO\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2-quickview-glasversiegelung\"\u003eQ² QuickView\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhen does glass actually need polishing?\u003c\/h3\u003e\n\u003cp\u003eQ²M GlassPolish is the answer when: hard-water spots won’t come off with any normal cleaner, the pane still looks cloudy or milky after a wash (oxidation), fine haze keeps coming back whatever glass cleaner you use, or you’re prepping for a fresh glass coating (stripping old sealant residue and getting the glass right). It isn’t an every-weekend product – you reach for it when cleaning alone falls short, and you follow it with a durable coating.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use Q²M GlassPolish – by hand and by machine\u003c\/h3\u003e\n\u003cp\u003eBy hand: put GlassPolish on a glass polishing pad or a microfibre and work it into the pane with circular passes. Keep the pressure even across the whole panel – push unevenly and you get patchy polished areas. Polish until the product turns clear, then wipe off and check what you’ve got. By machine: a DA on a medium setting with a glass polishing pad. Run lower speeds than you would on paint – glass takes heat differently. After polishing, clean the pane with \u003ca href=\"\/en\/products\/gyeon-q2m-glass-glasreiniger\"\u003eQ²M Glass\u003c\/a\u003e and lay \u003ca href=\"\/en\/products\/gyeon-q2-view-evo-rain-repellent-glasversiegelung\"\u003eQ² View EVO\u003c\/a\u003e straight onto that fresh, residue-free surface.\u003c\/p\u003e\n\n\u003ch3\u003eGlassPolish as part of the full glass-care system\u003c\/h3\u003e\n\u003cp\u003eThe GYEON glass line runs in a clear order: Step 1: clean with \u003ca href=\"\/en\/products\/gyeon-q2m-glass-glasreiniger\"\u003eQ²M Glass\u003c\/a\u003e. Step 2 (when needed): deep clean and polish with Q²M GlassPolish. Step 3: go over it again with Q²M Glass. Step 4: seal it for good with \u003ca href=\"\/en\/products\/gyeon-q2-view-evo-rain-repellent-glasversiegelung\"\u003eQ² View EVO\u003c\/a\u003e (long-term) or \u003ca href=\"\/en\/products\/gyeon-q2-quickview-glasversiegelung\"\u003eQ² QuickView\u003c\/a\u003e (quick application). Step 5 (maintenance): regular cleaning with \u003ca href=\"\/en\/products\/gyeon-q2m-glass-plus-glasreiniger-versiegelung\"\u003eQ²M Glass+\u003c\/a\u003e – a clean and a top-up in one pass.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: Q²M GlassPolish for a proper glass reset\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M GlassPolish comes out when normal cleaning has run out of road, and it’s the best prep you can give a long-term glass coating. Do the groundwork once with GlassPolish, seal with Q² View EVO, and you’ve got months of clear, hydrophobic glass with nothing to maintain. As a full glass kit we’d grab: Q²M GlassPolish + \u003ca href=\"\/en\/products\/gyeon-q2m-glass-glasreiniger\"\u003eQ²M Glass\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2-view-evo-rain-repellent-glasversiegelung\"\u003eQ² View EVO\u003c\/a\u003e – three steps to glass that stays crystal clear.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"250ml","offer_id":57335242817871,"sku":"D1-GYEON-Q2MGLSPOL250","price":28.0,"currency_code":"EUR","in_stock":false},{"title":"4 fl. oz.","offer_id":57335238918479,"sku":"D1-GYEON-Q2MGLSPOL120","price":16.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-glasspolish-glaspolitur_c3790e86-e501-470b-8426-3a38bde789c4.png?v=1774648051"},{"product_id":"gyeon-q2m-metalpolish-metallpolitur","title":"Q²M MetalPolish Metal Polish","description":"\u003ch2\u003eGet chrome and metal shining again – GYEON Q²M MetalPolish\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M MetalPolish? GYEON Q²M MetalPolish is a metal polish for chrome trim, stainless steel, polished alloy wheels and other metal trim on a car – it pulls off oxidation, tarnish and dull patches and takes metal surfaces back to a mirror shine.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eChrome trim, stainless mouldings and polished alloy surfaces lose their shine over time – oxidation, tarnish and whatever the weather throws at them. \u003cstrong\u003eGYEON Q²M MetalPolish\u003c\/strong\u003e is the pro answer: a metal polish with abrasives tuned specifically for metal, cutting through oxidation and tarnish and taking the surface back to a mirror finish – no aggressive acids, and no risk to the metal itself when you use it properly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePulls oxidation and tarnish off metal properly.\u003c\/strong\u003e Chrome and stainless oxidise over time and lose that signature mirror look. Q²M MetalPolish carries finely tuned abrasives that lift the oxide layer off gently and bring the original metal shine back.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks on chrome, stainless steel and polished aluminium.\u003c\/strong\u003e Q²M MetalPolish covers a lot of ground across the metals on a car: chrome mouldings, stainless exhaust tips, chrome bumpers on classics, polished alloy wheels and aluminium trim. The formula is safe on all of them.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLeaves a temporary protective film behind after polishing.\u003c\/strong\u003e Alongside the abrasives, Q²M MetalPolish carries protective polymers that leave a thin film on the metal once you are done – oxidation takes longer to come back and the mirror shine keeps going for longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Lay Q²M MetalPolish down by hand with a soft cotton applicator or a microfibre cloth, working in straight lines. Let the polish dry until it hazes white (about 2–5 minutes), then buff it off with a clean, dry cotton cloth. Heavily oxidised chrome – classic car bumpers, typically – often needs a second pass. Once you are done, follow up with a metal sealant or \u003ca href=\"\/en\/products\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung\"\u003eQ²M Cure\u003c\/a\u003e for protection that lasts.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eOxidation on metal: why regular care matters\u003c\/h3\u003e\n\u003cp\u003eMetal parts on a car sit in the firing line for oxidation, modern surface coatings or not. Chrome builds a natural oxide layer – which protects it, oddly enough, but kills the shine. Stainless picks up airborne iron particles and tarnishes. Polished alloy goes dull from rainwater and acids. Q²M MetalPolish is formulated to take those oxide layers off mechanically without touching the base metal – what you are left with is a freshly exposed layer of metal with its full shine potential back.\u003c\/p\u003e\n\n\u003ch3\u003eHow to work it on different metals\u003c\/h3\u003e\n\u003cp\u003eChrome (bright): lay MetalPolish on with a soft cloth in straight lines. Let it dry until the polish hazes white. Buff off with a cotton cloth – lean on it a bit and the shine steps up. Stainless steel (exhaust tips, mouldings): on brushed stainless, always polish along the grain, never across it. Bright stainless you treat exactly like chrome. Polished alloy wheels: work MetalPolish onto the polished sections by hand, let it dwell, then buff it off. On wheel faces that are deeply oxidised, a machine polisher head saves you a lot of time.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M MetalPolish for classics and chrome restoration\u003c\/h3\u003e\n\u003cp\u003eOn classics and cars running real chrome bumpers, chrome mouldings or chrome-plated wheels, Q²M MetalPolish is a restoration tool you do not want to be without. Decades of oxidation can take several passes – but the results speak for themselves: dull, tired chrome comes back looking mirror-fresh. Once the restoration is done, protect it with a metal sealant or a carnauba wax made for chrome.\u003c\/p\u003e\n\n\u003ch3\u003eWorth buying? Q²M MetalPolish for metal trim that shines\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M MetalPolish belongs on the shelf of anyone who wants the whole car to look right, metal details included. It earns its place on cars carrying a lot of chrome or stainless (classics, performance cars, trucks) and on exhaust tips and chrome wheels. As a companion, grab \u003ca href=\"\/en\/products\/gyeon-q2m-iron-wheel-cleaner-redefined-felgenreiniger\"\u003eQ²M Iron WheelCleaner\u003c\/a\u003e to prep wheels and chrome before you polish, and \u003ca href=\"\/en\/products\/gyeon-q2-rim-evo-ceramic-rim-coating-keramikversiegelung-fel\"\u003eQ² Rim EVO\u003c\/a\u003e as a ceramic coating for polished alloys once the polishing is done.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"4 fl. oz.","offer_id":57335239115087,"sku":"D1-GYEON-Q2MMETPOL120","price":17.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/GYEON_Q2M_MetalPolish_2021-3000.png?v=1774648395"},{"product_id":"gyeon-q2m-ppf-renew-politur-lackschutzfolie","title":"Q²M \"PPF\" Renew Polish for Paint Protection Film","description":"\u003ch2\u003eRefresh your PPF instead of replacing it – GYEON Q²M PPF Renew\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M PPF Renew? GYEON Q²M PPF Renew is a specialised polish for paint protection film – it takes fine scratches, smearing and oxidation off the PPF surface and brings back the film’s original clarity and look, without damaging the material.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eEven the best paint protection film starts showing its miles after a few years: fine scratches from washing and brush contact, a light haze from UV, baked-on grime that dulls the surface. \u003cstrong\u003eGYEON Q²M PPF Renew\u003c\/strong\u003e answers exactly that – a polish built for the softer PU\/TPU surface of protection film, so you clear the defects without hurting or thinning the film.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTakes fine scratches and smearing off the PPF surface, gently.\u003c\/strong\u003e PPF is softer than clearcoat – a normal paint polish chews into the film or goes straight through it. Q²M PPF Renew is dialled in for the hardness of polyurethane and clears defects without overloading the material.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrings clarity and gloss back to hazed film.\u003c\/strong\u003e UV and oxidation slowly cloud and yellow PPF over time. PPF Renew carries conditioners that revive the film and give the transparency back – the PPF looks new again.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePreps the surface for a PPF coating.\u003c\/strong\u003e Before you lay down \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e or another coating on the film, Q²M PPF Renew gives you the base you want – clean, defect-free and ready for the coating to bond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Work Q²M PPF Renew by hand, or by machine on a low setting with a soft finishing pad. With PPF, less is more – too much machine pressure heats the film up and stretches it. Wipe down with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e after polishing, then ideally go straight to \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e for lasting protection.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhen is Q²M PPF Renew the right call?\u003c\/h3\u003e\n\u003cp\u003ePPF Renew is for film that shows its use but is still structurally sound. Typical cases: fine wash marks on the film surface (they jump out on dark paint), light haze from UV ageing or water spots, dried-on bugs or bird bombs that left smears behind, and prep work before a PPF sealant goes on. If the film has deep tears, lifting edges or heavy yellowing, replacing those sections is the better call – Renew can’t fix structural damage.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use PPF Renew properly\u003c\/h3\u003e\n\u003cp\u003eClean the film thoroughly first and get all the loose dirt off. Put Q²M PPF Renew on a soft microfibre or a finishing pad. Work it by hand in circles, or by machine on a low setting (1–2). Important: keep the machine pressure down – PPF reacts to heat far more than clearcoat does. After polishing, take the residue off with a clean microfibre and wipe the surface down with \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e. Straight after that you can lay down \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschu\"\u003eQ²M PPF Maintain\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003ePPF Renew on self-healing film: what to watch\u003c\/h3\u003e\n\u003cp\u003eSelf-healing PPF (self-healing TPU) closes fine scratches on its own once it warms up. Before you reach for Q²M PPF Renew on self-healing film, check whether the scratches have already gone – hot water or a bit of sun is often all it takes. When they don’t close up (deeper defects, or colder weather), that’s where Q²M PPF Renew comes in. The polish works on self-healing film too and doesn’t kill the self-healing property.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M PPF Renew vs. a normal paint polish: why the difference matters\u003c\/h3\u003e\n\u003cp\u003eA normal paint polish – compound or finishing – is formulated for harder clearcoat. On PPF that gives you two problems: either it isn’t abrasive enough and the defects stay put, or it’s too aggressive and takes far too much off the softer film. Q²M PPF Renew is matched to the hardness of PU\/TPU film – full defect removal, no risk. For the normal paintwork next to the PPF we go with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: PPF Renew for PPF owners and detailers\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M PPF Renew pays off if you want to bring a hazed or scratched film back to life instead of replacing an expensive wrap early. It usually earns its keep on the first job – when the cloudy bonnet is clear again and the fine scratches are gone. As a full PPF renovation kit we’d grab: Q²M PPF Renew for the polishing, \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e for the wipe-down, \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e for the ceramic coating and \u003ca href=\"\/en\/products\/gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschu\"\u003eQ²M PPF Maintain\u003c\/a\u003e for ongoing upkeep.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57335243178319,"sku":"D1-GYEON-Q2MPPFRNW1000","price":54.0,"currency_code":"EUR","in_stock":false},{"title":"4 fl. oz.","offer_id":57335239377231,"sku":"D1-GYEON-Q2MPPFRNW120","price":16.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-ppf-renew-politur-lackschutzfolie.png?v=1774651431"}],"url":"https:\/\/detailing1.at\/en\/collections\/gyeon-q2m-polishing.oembed","provider":"Detailing1","version":"1.0","type":"link"}