{"title":"Wheel, Tire \u0026 Trim Sealant by GYEON","description":"\u003ch2\u003eCeramic Protection for Rims, Tires, and Plastic with GYEON Q²\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat are GYEON rim, tire, and plastic sealants? These specialized Q² coatings protect aluminum rims, tires, and plastic parts from brake dust, UV fading, and dirt adhesion – with adapted formulations for the specific requirements of these surfaces.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003cstrong\u003eRims, tires, and plastic parts\u003c\/strong\u003e on a vehicle are exposed to particular stresses: rims are affected by brake dust deposits, heat from the brakes, and aggressive cleaning agents; tires are exposed to UV radiation and ozone; plastic parts (bumpers, mirror caps, trim strips) tend to suffer from UV graying and dirt accumulation. GYEON has developed specialized Q² formulations for each of these areas, tailored to the chemical and thermal requirements of these surfaces – not a compromise product, but substrate-specific protection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermally resistant rim coating.\u003c\/strong\u003e GYEON rim coatings are designed for the heat from the braking system. Brake dust particles adhere significantly less to coated rims – making every cleaning easier and protecting the rim surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV protection and deep effect for plastic.\u003c\/strong\u003e Plastic and rubber surfaces benefit from a specialized coating that counteracts UV-induced fading and graying and gives the plastic a uniform, rich appearance – without excessive high gloss.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete protection concept for exterior and interior.\u003c\/strong\u003e Combined with paint sealant and glass sealant, a consistent protection concept for all exterior surfaces of the vehicle is created.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Always thoroughly decontaminate rims before coating – brake dust, rust film, and old care product residues must be completely removed. An acidic rim cleaner followed by an alkaline cleaner before the IPA wipe is the most reliable method. Then, coat the rims with as little heat stress as possible – i.e., after a longer standing time, not directly after a drive.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eGYEON Q² Rim Coat: Rim Coating for Brake Dust and Heat\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe GYEON Q² Rim Coat\u003c\/strong\u003e is specially formulated for the demands on alloy wheels – with increased temperature resistance and a protective matrix that offers less adhesion for brake dust particles. In practice, this means: Less dirt buildup after every drive, easier and lower-risk rim cleaning, and a permanently cleaner appearance. Application is similar to paint applications – clean, degreased rim, thin coating application, defined flash-off window, careful wiping. Especially with contoured spoke designs, careful application is crucial to avoid over-application in depressions.\u003c\/p\u003e\n\n\u003ch3\u003ePlastic Sealant and UV Protection for Exterior Plastics\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBlack and gray plastic parts\u003c\/strong\u003e – bumpers, mirror housings, sills, and trim strips – gray over time due to UV radiation and oxidize. A special plastic sealant from the GYEON Q² line restores the plastic to its original condition and protects it long-term from further UV attack. Unlike standard plastic care products that only temporarily color, a ceramic coating on plastic forms a more durable protective layer. For plastic parts in the interior, we recommend the \u003ca href=\"\/en\/collections\/gyeon-q2m-maintenance-interieur\"\u003eQ²M Interior products\u003c\/a\u003e from the Maintenance line.\u003c\/p\u003e\n\n\u003ch3\u003eRim Sealant and Plastic Care Compared to Conventional Products\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eConventional rim polishes and plastic care products\u003c\/strong\u003e offer short-term protection and cosmetic improvements – but no permanent protective layer. GYEON Q² specialized sealants offer significantly longer durability and stronger protection due to chemical bonding with the substrate. This applies particularly to rims: A vehicle regularly treated with tire shine or rim polish often needs care again after every wash. A ceramic coating, once applied, on the other hand, lasts significantly longer and measurably reduces maintenance effort.\u003c\/p\u003e\n\n\u003ch3\u003eBuy GYEON Rim and Plastic Sealant\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAt Detailing1\u003c\/strong\u003e, you will find the specialized Q² sealants for rims, tires, and plastic – together with the suitable surface preparation from the \u003ca href=\"\/en\/collections\/gyeon-q2m-maintenance-raeder\"\u003eQ²M Maintenance rim care line\u003c\/a\u003e. For a complete exterior protection concept, combine the rim sealant with the \u003ca href=\"\/en\/collections\/gyeon-q2-ceramic-coatings-lack-versiegelung\"\u003eQ² paint coating\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/gyeon-q2-ceramic-coatings-glas\"\u003eQ² glass sealant\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"gyeon-q2-trim-evo-ceramic-trim-restorer-protectant-keramikversiegelung-kunststoff","title":"Q² Trim EVO Ceramic Trim Restorer \u0026 Protectant Ceramic Coating for Plastics","description":"\u003ch2\u003ePermanently Enhance Black Plastics – GYEON Q² Trim EVO\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q² Trim EVO? GYEON Q² Trim EVO is a ceramic plastic restorer that restores a deep, lasting black to faded and weathered exterior plastics and seals the surface with an SiO₂ protective layer – for long-lasting black trim without regular reapplication.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eFaded bumpers, dull mirror housings, lightened door trims – this sight is typical for older vehicles and a common reason for a quickly aged appearance that has nothing to do with the actual condition of the vehicle. \u003cstrong\u003eGYEON Q² Trim EVO\u003c\/strong\u003e permanently restores the deep black of exterior plastic parts and simultaneously seals the surface against further fading. The EVO standard offers improved SiO₂ concentration and a more homogeneous layer formation on the textured plastic surface.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermanently restores deep black – no regular reapplication.\u003c\/strong\u003e Unlike simple plastic care products that moisten the surface with oils and quickly degrade, Q² Trim EVO forms a durable SiO₂ protective layer. The result lasts for weeks to months – without weekly reapplication.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV protection prevents renewed fading from sun exposure.\u003c\/strong\u003e Plastic parts primarily fade due to UV radiation, which breaks down the carbon compounds in the polymer. Q² Trim EVO contains UV stabilizers that are active after treatment and slow down fading – true prevention instead of just cosmetic concealment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirt-repellent due to hydrophobic sealant.\u003c\/strong\u003e The SiO₂ layer on the plastic is hydrophobic: dirt adheres less strongly, rainwater beads off, and the plastic parts remain cleaner and better maintained for longer. This is a real advantage, especially for lower-mounted attachments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For heavily faded or deeply soiled plastic parts, we recommend a thorough cleaning with \u003ca href=\"\/en\/products\/gyeon-q2m-trim-cleaner-kunststoffreiniger-stark\"\u003eGYEON Q²M TrimCleaner\u003c\/a\u003e before using Q² Trim EVO. Heavily faded surfaces can also be briefly warmed with a heat gun – this opens the pores of the plastic and significantly improves the penetration depth of the product. Then apply Q² Trim EVO thinly, allow it to penetrate, and wipe off any excess.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhy exterior plastic fades and how Q² Trim EVO counteracts it\u003c\/h3\u003e\n\u003cp\u003ePolypropylene (PP) and other exterior plastic materials used in vehicle manufacturing contain pigments and additives that give the material its black color. UV radiation attacks these compounds over time – the pigments bleach out, plasticizers migrate to the surface and oxidize. The result is the characteristic white-grey layer on black plastic parts. GYEON Q² Trim EVO penetrates the plastic surface with SiO₂ compounds that fill the pores and reduce the outgassing of plasticizers. At the same time, the product restores deep black pigments to the surface. The SiO₂ protective layer then shields the surface from further UV exposure.\u003c\/p\u003e\n\n\u003ch3\u003eApplication: Quickly and permanently restore faded plastic\u003c\/h3\u003e\n\u003cp\u003eFor maximum effectiveness of Q² Trim EVO, first thoroughly clean the plastic parts with \u003ca href=\"\/en\/products\/gyeon-q2m-trim-cleaner-kunststoffreiniger-stark\"\u003eQ²M TrimCleaner\u003c\/a\u003e to remove old products, wax, and oil residues. For heavily faded surfaces, briefly warm them with a heat gun (40–60°C). Then apply Q² Trim EVO to the plastic with an applicator or a piece of microfiber cloth and spread it evenly – use circular movements for even coverage on textured surfaces. After the dwell time, wipe off any excess with a clean cloth. The result is immediately visible – permanently deep black after full curing.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of application: Which plastic parts benefit from Q² Trim EVO?\u003c\/h3\u003e\n\u003cp\u003eGYEON Q² Trim EVO is suitable for all unpainted exterior plastic parts: bumpers, side skirts, wheel arch extensions, door handles, mirror housings, bonnet edges, and roof trim strips. Especially effective on black and dark grey polypropylene. Not suitable for painted plastic parts (the coating will run on the paint) or for interior plastics. For the care of interior plastics, we recommend the \u003ca href=\"\/en\/products\/gyeon-q2m-interior-detailer-purify-line-innenraumr\"\u003eGYEON Q²M InteriorDetailer\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eTrim EVO vs. classic plastic care products: What's the difference?\u003c\/h3\u003e\n\u003cp\u003eClassic plastic care products are based on oils or waxes that visually fill the plastic and blacken it temporarily. After a few weeks – often after the first rain – the oil leaves the surface, and the plastic turns grey again. Q² Trim EVO works differently: The SiO₂ compounds form a chemically stable layer that doesn't simply wash away. This means: longer black plastic parts, less reapplication, better UV protection. A permanent result instead of recurring cosmetic treatment.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase recommendation: For permanently black trim\u003c\/h3\u003e\n\u003cp\u003eGYEON Q² Trim EVO is recommended for all vehicle owners with black exterior plastic parts who are looking for a more permanent solution than conventional plastic care products. Especially useful for vehicles with intense sun exposure or for used cars where the plastic parts are already visibly faded. As a complete system: \u003ca href=\"\/en\/products\/gyeon-q2m-trim-cleaner-kunststoffreiniger-stark\"\u003eQ²M TrimCleaner\u003c\/a\u003e for cleaning and degreasing, then Q² Trim EVO for permanent protection and appearance.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"30 mL","offer_id":57134830879055,"sku":"D1-GYEON-Q2TRIMEVO","price":55.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2-trim-evo-ceramic-trim-restorer-protectant-keramikversiegelung-kunststoff.png?v=1772281707"},{"product_id":"gyeon-q2-rim-evo-ceramic-rim-coating-keramikversiegelung-felgen","title":"Q² Rim EVO Ceramic Rim Coating","description":"\u003ch2\u003ePermanently Clean Rims – GYEON Q² Rim EVO\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q² Rim EVO? GYEON Q² Rim EVO is a professional ceramic coating for alloy wheels that builds a hard SiO₂ protective layer – heat-resistant, brake dust-repellent, and easy to clean, for permanently clean rims with minimal maintenance.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eRims are the hardest part of a vehicle to clean – brake dust, high temperatures, and mechanical stress quickly render classic care products ineffective. \u003cstrong\u003eGYEON Q² Rim EVO\u003c\/strong\u003e fundamentally changes the situation: a high-temperature resistant ceramic coating lays a permanent protective layer over the rim, which keeps brake dust and dirt on the surface, prevents it from penetrating, and reduces cleaning to a minimum. The EVO standard offers optimized temperature resistance and improved curing behavior.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-temperature resistant protective layer – heat resistant to well over 200°C.\u003c\/strong\u003e Rims heat up considerably during driving due to brake friction. Conventional waxes or polymer sealants melt or decompose at these temperatures. Q² Rim EVO is designed for high-temperature use and retains its protective properties even under intense braking loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrake dust beads off instead of baking on.\u003c\/strong\u003e Brake dust particles are the main problem with rim contamination – without protection, they bake onto the rim surface under heat and are then very difficult to remove. Q² Rim EVO creates a hydrophobic barrier, causing brake dust and road grime to bead off and preventing them from sticking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRim cleaning significantly easier – without aggressive rim cleaners.\u003c\/strong\u003e Sealed rims can be cleaned with significantly less effort. Water and a mild cleaner are sufficient in most cases – the need for aggressive rim cleaners becomes less frequent, which protects the rim surface and preserves the coating longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's practical tip:\u003c\/strong\u003e Thoroughly clean the rims before coating – all brake dust deposits, tar spots, and oil residues must be completely removed. First, use \u003ca href=\"\/en\/products\/gyeon-q2m-iron-wheel-cleaner-redefined-felgenreini\"\u003eGYEON Q²M Iron WheelCleaner\u003c\/a\u003e for rust film and brake dust, then a degreaser if necessary. The rim must be completely cold when Q² Rim EVO is applied – never coat warm rims.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eChemistry and Physics: Why Ceramic Rim Coatings Are Different\u003c\/h3\u003e\n\u003cp\u003eThe challenge with rim coatings is temperature stability. Rims can heat up to 150–300°C during intensive braking – depending on the vehicle and driving style. Waxes already melt at 80–90°C, polymer sealants last a little longer but also dissolve under extreme heat. GYEON Q² Rim EVO uses SiO₂ chemistry with an optimized high-temperature hardener: the cured layer retains its structure and protective effect even under extreme braking loads. The EVO standard of the formulation improves temperature resistance and ensures more homogeneous layer formation on the often-structured rim surface.\u003c\/p\u003e\n\n\u003ch3\u003eApplication: Rim Coating Step-by-Step\u003c\/h3\u003e\n\u003cp\u003ePreparation is key when it comes to rim coating. First, thoroughly clean the rims of brake dust and rust film with \u003ca href=\"\/en\/products\/gyeon-q2m-iron-wheel-cleaner-redefined-felgenreini\"\u003eQ²M Iron WheelCleaner\u003c\/a\u003e, and if necessary, remove tar-containing residues with a tar remover. After complete cleaning, degrease and allow to dry. Then apply Q² Rim EVO thinly and evenly to the rim – treat spokes, bowl, and rim flange separately. After the flash time, work it in with a microfiber cloth. Proceed panel by panel per rim. Curing at room temperature takes 12–24 hours – only move the vehicle after complete curing. After the first drive, allow the rims to cool and remove any stains from the initial braking heat with a cloth.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application: Which Rims and Vehicles Benefit Most?\u003c\/h3\u003e\n\u003cp\u003eGYEON Q² Rim EVO is particularly recommended for vehicles with high brake dust accumulation (sports cars, SUVs with large brakes), for vehicles with light rim colors (white, silver, polished – where brake dust is immediately visible), and for all vehicles where the rims are an important visual part of the vehicle. Q² Rim EVO also offers long-lasting protection against direct contact with aggressive dirt particles for rims with intricate paintwork or high-gloss polish.\u003c\/p\u003e\n\n\u003ch3\u003eQ² Rim EVO vs. Standard Rim Care Products\u003c\/h3\u003e\n\u003cp\u003eThe rim care market offers many solutions – from rim wax to spray sealants and special sealants. Conventional rim waxes or sealants last 4–8 weeks under normal driving conditions; often significantly less under intensive braking. GYEON Q² Rim EVO is a true ceramic coating: it lasts many months under the same conditions, is more temperature-resistant, and provides a harder, more durable surface. The higher application effort quickly pays off through longer lasting effectiveness and significantly reduced cleaning effort.\u003c\/p\u003e\n\n\u003ch3\u003eRecommendation: Permanently Clean Rims with Minimal Effort\u003c\/h3\u003e\n\u003cp\u003eGYEON Q² Rim EVO is recommended for anyone who wants to permanently reduce the cleaning effort for their rims and at the same time establish professional protection. As a care system, we recommend: \u003ca href=\"\/en\/products\/gyeon-q2m-iron-wheel-cleaner-redefined-felgenreini\"\u003eQ²M Iron WheelCleaner\u003c\/a\u003e for regular cleaning, Q² Rim EVO as a base sealant. After the coating application, only water and a mild cleaner are needed for normal rim washing.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"30 mL","offer_id":57134850539855,"sku":"D1-GYEON-Q2RIMEVO","price":55.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2-rim-evo-ceramic-rim-coating-keramikversiegelung-felgen.png?v=1772282576"},{"product_id":"gyeon-q2-tire-ceramic-tire-protecant-reifenpflege-versiegelung","title":"Q² Tire Ceramic Tire Protectant Tire Care with Sealant","description":"\u003ch2\u003eProfessional Ceramic-Based Tire Care – GYEON Q² Tire\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q² Tire? GYEON Q² Tire is a ceramic-based tire care product that provides a long-lasting silky-matte to slightly glossy finish, offers UV protection, and unlike traditional tire shine products, it doesn't sling, doesn't stain, and lasts for weeks.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eTire care has a bad reputation – and that came from products that, while providing short-term shine, would spray the entire vehicle with oily tire dressing on the first drive. \u003cstrong\u003eGYEON Q² Tire\u003c\/strong\u003e is a different approach: a ceramic-based tire care that permanently nourishes and protects the rubber, without slinging, without oily residue, and without the exaggerated, unnatural high-gloss that many drivers dislike. The result is a well-maintained, natural-looking tire – clean, deep black, and permanently protected.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo slinging, no smearing – sealed tire stays on the rubber.\u003c\/strong\u003e The most common problem with conventional tire care products is migration: the care product migrates from the rubber and slings onto the bodywork and windows during driving. Q² Tire permanently bonds with the rubber surface and stays there – no stains on the vehicle, no annoying post-cleaning.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong-lasting – significantly longer than conventional tire sprays.\u003c\/strong\u003e Classic tire shine products last a week or two at best. Q² Tire, thanks to its ceramic-based formulation, lasts significantly longer – several weeks to months, depending on use and weather conditions. This means less effort and a more consistent look over a longer period.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV protection prevents graying and cracking.\u003c\/strong\u003e Tires gray due to UV radiation and ozone exposure – the rubber becomes brittle, develops fine cracks, and loses its rich black color. Q² Tire protects the rubber from UV degradation and keeps tires permanently deep black, elastic, and in optimal visual condition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Thoroughly clean tires before application with \u003ca href=\"\/en\/products\/gyeon-q2m-tire-cleaner-reifenreiniger\"\u003eGYEON Q²M TireCleaner\u003c\/a\u003e – old products, silicone residues, and brake dust must be completely removed, otherwise Q² Tire will not adhere evenly. After cleaning, let it dry and apply Q² Tire thinly and evenly with an applicator sponge. Allow at least 30 minutes to cure before moving the vehicle – this minimizes slinging on the first drive.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhy classic tire care products often disappoint\u003c\/h3\u003e\n\u003cp\u003eThe problems of classic tire shine products are well known: they are often based on silicone oils that provide short-term shine but are not permanently bonded to the rubber. When driving, these oils sling from the rotating tire sidewall and land on the bodywork, rims, and windows. The layer must be renewed weekly and often leaves an unnatural, oily high-gloss finish. GYEON Q² Tire takes a different chemical approach: the ceramic compounds penetrate the rubber surface and bond there – similar to a coating on paint. This eliminates slinging and significantly extends durability.\u003c\/p\u003e\n\n\u003ch3\u003eApplication: How to apply Q² Tire optimally to tires\u003c\/h3\u003e\n\u003cp\u003eTire cleaning is the crucial preparation step. Thoroughly clean the tires with \u003ca href=\"\/en\/products\/gyeon-q2m-tire-cleaner-reifenreiniger\"\u003eQ²M TireCleaner\u003c\/a\u003e, removing old oils and tire care product residues. After drying, apply Q² Tire evenly to the tire sidewall with an applicator sponge – a thin layer is sufficient, no need to press. Allow the product to penetrate and wipe off any excess liquid with a clean cloth. Wait at least 30-60 minutes before moving the vehicle. The result is a rich black tire with a natural, subtly glossy to matte finish – depending on the amount applied. A darker, richer result can be achieved with a second layer after complete curing.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of application: For which vehicles and requirements?\u003c\/h3\u003e\n\u003cp\u003eGYEON Q² Tire is suitable for all vehicles where the owner values well-maintained tires without exaggerated high-gloss and without slinging. Ideal for daily drivers, sports cars, and vehicles regularly presented at shows or exhibitions. For motorsport vehicles, where tire care is applied before track driving, Q² Tire offers a significant safety advantage due to its non-slinging property. For vehicles without ceramic tire sealing, we recommend the combined product \u003ca href=\"\/en\/products\/gyeon-q2m-tire-express-reifenpflege\"\u003eQ²M TireExpress\u003c\/a\u003e for quick intermediate care.\u003c\/p\u003e\n\n\u003ch3\u003eQ² Tire vs. cheap tire shine sprays: The difference in practice\u003c\/h3\u003e\n\u003cp\u003eA cheap tire shine spray costs a fraction of Q² Tire – and must be renewed weekly. Calculated over a year: four to eight applications with Q² Tire vs. forty to fifty applications with a silicone spray. The time spent and product consumption clearly favor Q² Tire in the long run. In addition, there is the superior appearance (no smearing, more natural finish) and UV protection, which is usually missing from cheaper products. Once you no longer have splashes on the bodywork after a drive, you won't want to go back to cheap products.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase recommendation: For permanently well-maintained tires\u003c\/h3\u003e\n\u003cp\u003eGYEON Q² Tire is recommended for anyone who takes tire care seriously and wants a long-lasting, natural result without product slinging. As a complete tire care system, we recommend: \u003ca href=\"\/en\/products\/gyeon-q2m-tire-cleaner-reifenreiniger\"\u003eQ²M TireCleaner\u003c\/a\u003e for thorough cleaning, Q² Tire for sealing, and \u003ca href=\"\/en\/products\/gyeon-q2m-tire-express-reifenpflege\"\u003eQ²M TireExpress\u003c\/a\u003e for quick intermediate care between sealing cycles.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"500ml","offer_id":57135503442255,"sku":"D1-GYEON-Q2TIRE500","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2-tire-ceramic-tire-protecant-reifenpflege-versiegelung.png?v=1772288515"}],"url":"https:\/\/detailing1.at\/en\/collections\/gyeon-q2-ceramic-coatings-felgen-reifen.oembed","provider":"Detailing1","version":"1.0","type":"link"}